A New Alternator and Mounting Hardware Are Used For Certain G3306B Engines {1405}
- Engine:
- G3304B (S/N: A4E1-UP)
- G3306B (S/N: R6S1-UP)
Description of Change: The new alternator used resolves problems with over charging and Revolutions Per Minute (RPM) issues.
Adaptable To: The new 6N-9294 Charging Alternator Gp replaces the previous 6T-1395 Charging Alternator Gp. The associated mounting hardware will need replaced to accommodate the new alternator.
Table 1 contains the new parts. Table 2 contains the effective serial numbers.
Show/hide table
Item     | Qty     | Part Number     | Part Description     |
---|---|---|---|
1     | 1     | 0L-1352     | Bolt     |
2     | 1     | 0S-1591     | Bolt     |
3     | 1     | 0S-1595     | Bolt     |
4     | 1     | 2A-1531     | Bolt     |
5     | 1     | 321-5262     | Spacer     |
6     | 1     | 348-2759     | Alternator Bracket As     |
7     | 1     | 5L-3979     | V-Belt Gp     |
8     | 1     | 6N-9294     | Charging Alternator Gp     |
9     | 1     | 7D-1649     | Hard Washer     |
10     | 1     | 7N-2597     | Spacer     |
11     | 1     | 8L-8867     | Pulley     |
12     | 1     | 9X-8874     | Bolt     |
Show/hide table
Effective Serial Numbers     |
---|
S/N:A4E00194-UP     |
S/N:R6S02242-UP     |
Caterpillar Information System:
XQC1200 and XQC1600 Power Modules Engine Oil Pressure Sensor - Remove and Install - Filtered and Unfiltered
PM820, PM822, and PM825 Cold Planer Track Drive Planetary Oil Level - Check
PM820, PM822, and PM825 Cold Planer Track Drive - Inspect
PM820, PM822, and PM825 Cold Planer Steering Cylinder Ends - Lubricate
XQC1200 and XQC1600 Power Modules Turbocharger Inlet Temperature Sensor - Remove and Install
PM820, PM822, and PM825 Cold Planer Rotor Service Door Pivot Pins - Lubricate
PM820, PM822, and PM825 Cold Planer Rotor Service Door Cylinder Pins - Lubricate
460-9016 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000} 460-9016 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000}
XQC1200 and XQC1600 Power Modules Turbocharger Inlet Pressure Sensor - Remove and Install
PM820, PM822, and PM825 Cold Planer Rotor Bearing Oil Level - Check
PM820, PM822, and PM825 Cold Planer Rotor Bearing Oil - Change
PM820, PM822, and PM825 Cold Planer Pump Drive Oil Sample - Obtain
Improper Installation of the 274-6717 Crankcase Pressure Sensor on 3500 Commercial Engines{1408, 1439, 1916} Improper Installation of the 274-6717 Crankcase Pressure Sensor on 3500 Commercial Engines{1408, 1439, 1916}
2014/08/08 New Engine Software Is Used on Certain 3512C Well Fracturing Engines {1901, 1920}
2014/08/15 New Turbocharger Support Bolts Are Used on 3512C HD Drilling Engines {1052, 7553}
2014/08/15 New Oil Cooler and Turbochargers Are Available for Certain 3512C Land Drilling Engines {1052, 1053, 1378}
2014/10/03 New Aftercooler Elbow Mounting Brackets Are Now Used On Certain 3600 and C280 Engines {1063, 1063}
460-9231 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000} 460-9231 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000}
G3516 TA Engine Fuel Pressure Is High
460-9243 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000} 460-9243 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000}
G3516 TA Engine Fuel Pressure Is Low
460-9353 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000} 460-9353 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000}
C3.4B Engines Oil Contains Fuel
460-9788 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000} 460-9788 Top End Overhaul Foundational Kit for 3412 Generator Set Engines{1000}