Power Sources
发动机向 ECM 供电。 ECM 会向以下部件供电:
- 发动机上的所有传感器和清洁排放模块
- 氧化氮(NOx)传感器
- 喷油泵吸油控制阀
- 废气旁通阀电磁阀
- 诊断接头
- 电子单体喷油器
预热塞由蓄电池直接供电。
发动机 ECM 还控制 DEF 系统的电源。 发动机 ECM 不向系统供电。
Show/hide table
图 1 | g02423278 |
典型示例 |
ECM 和系统的供电来自 24 伏或 12 伏蓄电池。 ECM 的电源含有以下部件:
- 蓄电池
- 断路开关
- 点火开关
- 保险丝
- 接地螺栓
- ECM 接头
ECM 示意图显示了典型电源电路的主要部件。 蓄电池电压通常连接至 ECM。 来自点火开关的输入将会接通 ECM。
可以旁通导线线束来进行故障诊断与排除。
可以使用电子维修工具上的显示屏幕来检查电源电压。
Show/hide table
图 2 | g03710923 |
压力传感器示意图 |
ECM 通过 ECM 接头向各传感器提供 5 伏 VDC 电源。 电源具备短路保护功能。 在传感器或配线线束短路不损坏 ECM。
Show/hide table
图 3 | g02149319 |
典型示例 |
Show/hide table
图 4 | g03698495 |
DEF 喷射控制系统示意图的典型示例 |
Caterpillar Information System:
C4.4 Engines for Caterpillar Built Machines Electronic Control System
C4.4 Engines for Caterpillar Built Machines Clean Emissions Module - Diesel Oxidation Catalyst (DOC), Diesel Particulate Filter (DPF) and Selective Catalytic Reduction (SCR) System
C4.4 Engines for Caterpillar Built Machines Clean Emissions Module - Diesel Oxidation Catalyst (DOC) and Selective Catalytic Reduction (SCR) System
2014/12/12 New Fuel Injector Rocker Arms Are Used on Certain C13 Commercial Engines {1123}
C4.4 Engines for Caterpillar Built Machines DEF Dosing Control System
Retrofit SCR Aftertreatment Maintenance Interval Schedule
2014/07/03 New Accessory Drives Are Used on Certain 3500 Machine Engines {1207}
797 Off-Highway Truck Hydraulic System Hoist System - Oil Makeup - If Equipped
421-1011 Valve Recession Tool Group used on G3500 C, E, ; H Engines{0374, 0599, 0701, 0703, 1100} 421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
797 Off-Highway Truck Manual Lowering (Powered Stairway) - Test - If Equipped
2014/06/13 Additional Diesel Particulate Filter (DPF) Ash Service Cleaning Interval Information Is Now Used On Certain Tier 4 Interim and Tier 4 Final C7.1 - C18 Engines {108F}
2014/06/13 New Engine Software Is Used on Certain C175 Electric Power Generation (EPG) Engines {1901, 1920}
3516B Generator Sets with Dynamic Gas Blending Component Location
C9 Generator Set Model View Illustrations
Bench Test Procedure for Hydraulic Piston Pumps {5070} Bench Test Procedure for Hydraulic Piston Pumps {5070}
C7.1 Commercial Marine Engine Welding Precaution
2014/06/20 New Software Is Used on Certain G3516B 1500 RPM Generator Set Engines {1901, 1920}
C7.1 Generator Sets Model View Illustrations
C7.1 Generator Sets Product Description
C7.1 Generator Sets Refill Capacities
C7.1 Generator Sets Voltage Regulators
336F XE Excavator Machine System Specifications Coupler Lines
C3.4B Industrial Engine Safety Messages
C3.4B Industrial Engine Burn Prevention