New Accessory Drives Are Used on Certain 3500 Machine Engines {1207}
- Excavator:
- 5230B (S/N: 4HZ1-UP)
- Transmission:
- TH55 - KRESS (S/N: KCH1-UP)
- Off-Highway Truck/Tractor:
- 776D (S/N: AFS1-UP)
- Track-Type Tractor:
- D11N (S/N: 4HK1-UP; 74Z1-UP)
- Wheel Dozer:
- 854G (S/N: AMP1-UP; A4W1-UP; 1JW1-UP)
- Wheel Loader:
- 992G (S/N: 7HR1-UP; AZX1-UP; ADZ1-UP)
- 777B (S/N: 4YC1-UP)
- 777C (S/N: 4XJ1-UP)
- 777D (S/N: FKR1-UP; 3PR1-UP)
- 784C (S/N: 2PZ1-UP)
- 785 (S/N: 8GB1-UP)
- 785B (S/N: 6HK1-UP)
- 785C (S/N: APX1-UP; 5AZ1-UP)
- 785D (S/N: DMC1-UP; MSY1-UP)
- 789 (S/N: 9ZC1-UP)
- 789B (S/N: 7EK1-UP)
- 789C (S/N: 2BW1-UP)
- 793B (S/N: 1HL1-UP)
- 793C (S/N: CBR1-UP; 4AR1-UP; ATY1-UP; 4GZ1-UP)
- 793D (S/N: FDB1-UP)
- 994 (S/N: 9YF1-UP)
- 994D (S/N: 3TZ1-UP)
- 994F (S/N: 4421-UP)
- 994H (S/N: DWC1-UP)
Description of Change: The new accessory drives have a tighter shaft clearance. This tighter clearance prevents oil leakage.
Adaptable To: The new accessory drive replaces the existing accessory drive. The new accessory drive is adaptable back to first production on the serial numbers listed above.
Install the parts identified in Table 1 and Illustration 1 using any other parts required per application. Refer to Parts Identification for the required parts per application.
Refer to the Disassembly and Assembly manual for the correct procedures.
Show/hide table
Item     | New Part Number     | Description     | Quantity     |
1     | 362-8082     | Accessory Drive Gear     | 1     |
2     | 7N-7539     | Thrust Washer     | 2     |
3     | 364-6393     | Adapter As     | 1     |
4     | 2B-2695     | Bolt     | 4     |
5     | 9M-1974     | Hard Washer     | 4     |
Show/hide table
Illustration 1 | g03747376 |
Accessory drive |
This change is effective on the serial numbers listed in Table 2.
Show/hide table
Effective Serial Numbers     |
S/N:4HZ00237-UP     |
S/N:AFS00101-UP     |
S/N:4YC01867-UP     |
S/N:4XJ01124-UP     |
S/N:3PR01127-UP     |
S/N:FKR02322-UP     |
S/N:2PZ00107-UP     |
S/N:8GB00863-UP     |
S/N:6HK00988-UP     |
S/N:APX02379-UP     |
S/N:5AZ00428-UP     |
S/N:MSY00648-UP     |
S/N:DMC00175-UP     |
S/N:9ZC00678-UP     |
S/N:7EK00689-UP     |
S/N:2BW02129-UP     |
S/N:1HL00525-UP     |
S/N:4AR00425-UP     |
S/N:4GZ00265-UP     |
S/N:ATY01125-UP     |
S/N:CBR00109-UP     |
S/N:FDB01835-UP     |
S/N:1JW00245-UP     |
S/N:A4W00289-UP     |
S/N:AMP00356-UP     |
S/N:7HR00388-UP     |
S/N:ADZ00624-UP     |
S/N:AZX00840-UP     |
S/N:9YF00228-UP     |
S/N:3TZ00337-UP     |
S/N:44200341-UP     |
S/N:DWC00501-UP     |
S/N:4HK00636-UP     |
S/N:74Z01153-UP     |
S/N:KCH22060-UP     |
Caterpillar Information System:
797 Off-Highway Truck Hydraulic System Hoist System - Oil Makeup - If Equipped
421-1011 Valve Recession Tool Group used on G3500 C, E, ; H Engines{0374, 0599, 0701, 0703, 1100} 421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
797 Off-Highway Truck Manual Lowering (Powered Stairway) - Test - If Equipped
2014/06/13 Additional Diesel Particulate Filter (DPF) Ash Service Cleaning Interval Information Is Now Used On Certain Tier 4 Interim and Tier 4 Final C7.1 - C18 Engines {108F}
2014/06/13 New Engine Software Is Used on Certain C175 Electric Power Generation (EPG) Engines {1901, 1920}
C8.7 Marine Engine Belt - Inspect
C175-16 PETROLEUM ENGINES Fuel Pump (High Pressure) - Remove and Install
XQC1200 and XQC1600 Power Modules Water Temperature Regulators - Remove and Install - Auxiliary Water System
C8.7 Marine Engine Oil Cooler Core - Check/Clean/Test - Gear Oil Cooler - If Equipped
2014/06/20 A Shorter Plug Is Required on the Water Pump Group of Certain C-9 Engines {1361, 7553}
XQC1200 and XQC1600 Power Modules Water Pump - Remove and Install
C175-16 PETROLEUM ENGINES Fuel Control Valve - Remove and Install - Primary
Retrofit SCR Aftertreatment Maintenance Interval Schedule
C4.4 Engines for Caterpillar Built Machines DEF Dosing Control System
2014/12/12 New Fuel Injector Rocker Arms Are Used on Certain C13 Commercial Engines {1123}
C4.4 Engines for Caterpillar Built Machines Clean Emissions Module - Diesel Oxidation Catalyst (DOC) and Selective Catalytic Reduction (SCR) System
C4.4 Engines for Caterpillar Built Machines Clean Emissions Module - Diesel Oxidation Catalyst (DOC), Diesel Particulate Filter (DPF) and Selective Catalytic Reduction (SCR) System
C4.4 Engines for Caterpillar Built Machines Electronic Control System
C4.4 Engines for Caterpillar Built Machines Power Sources
3516B Generator Sets with Dynamic Gas Blending Component Location
C9 Generator Set Model View Illustrations
Bench Test Procedure for Hydraulic Piston Pumps {5070} Bench Test Procedure for Hydraulic Piston Pumps {5070}
C7.1 Commercial Marine Engine Welding Precaution
2014/06/20 New Software Is Used on Certain G3516B 1500 RPM Generator Set Engines {1901, 1920}