Engine Oil Pan - Disassemble
Start By:
- Remove the engine oil pan.
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove screen (1) from the housing.
Show/hide table
Illustration 2 g00632994 - Remove suction bell (2). Remove the O-ring seal from suction bell (2).
Show/hide table
Illustration 3 g00632997 - Remove clamp (3).
Show/hide table
Illustration 4 g00632999 - Remove tube assembly (4). Remove the O-ring seal on tube assembly (4).
- Remove housing (5). Remove the O-ring seal from housing (5).
Show/hide table
Illustration 1 | g00632989 |
- Remove bolts (6). Remove cover (8). The suction screen is externally mounted behind the cover inside the tube assembly. Remove bolts (9). If necessary, remove tee (7).
Show/hide table
Illustration 6 g01293432 - Remove suction bell (10).
Show/hide table
Illustration 7 g01293434 - Remove clamp (11).
- Remove tube assembly (12). Remove the O-ring seals from tube assembly (12).
Note: Check the O-ring seals for damage. If necessary, replace the O-ring seals.
Show/hide table
Illustration 5 | g01293429 |
Caterpillar Information System:
C280-08 Tier 4 Engine Engine Oil Pan - Remove and Install
374F and 390F Excavators Tool Control System One-Way/Two Pump - Electric Control: Relief Valve (Line) - Test and Adjust
374F and 390F Excavators Tool Control System Medium Pressure: Relief Valve (Main) - Test and Adjust
374F and 390F Excavators Tool Control System Medium Pressure: Relief Valve (Line) - Test and Adjust
374F and 390F Excavators Tool Control System Medium Pressure: Default Value of Work Tool Parameters
C4.4 Marine Generator Set Crankcase Fumes Disposal Tube Has Oil Draining
C4.4 Marine Generator Set Crankcase Breather Ejects Oil
C4.4 Engines for Caterpillar Built Machines Fuel Manifold (Rail) - Remove and Install
C4.4 Marine Generator Set Coolant Temperature Is High
C4.4 Marine Generator Set Coolant Level Is Low
C4.4 Marine Generator Set Coolant Contains Oil
C4.4 Marine Generator Set Battery Problem
C280-08 Tier 4 Engine Engine Oil Pan - Assemble
C280-08 Tier 4 Engine Oil Temperature Regulators - Remove and Install
C280-16 Tier 4 Marine Engine and C280-12 Tier 4 Marine Engine Priority Valve - Remove and Install
C280-08 Tier 4 Engine Priority Valve - Disassemble
C280-08 Tier 4 Engine Priority Valve - Assemble
C280-08 Tier 4 Engine Vibration Damper - Remove and Install
Updating the NOx Reduction System Delta Pressure Sensor on Certain C9.3 Through C32 Engines {1408, 191N} Updating the NOx Reduction System Delta Pressure Sensor on Certain C9.3 Through C32 Engines {1408, 191N}
C15 and C18 Tier 4 Final Engines Aftertreatment SCR System Dosing - Test
C280-16 Tier 4 Marine Engine and C280-12 Tier 4 Marine Engine Flywheel and Ring Gear - Remove and Install
C-16 and 3456Cylinder Packs, Short Blocks, and Long Blocks May Have Oversize Piston Skirts{1225} C-16 and 3456Cylinder Packs, Short Blocks, and Long Blocks May Have Oversize Piston Skirts{1225}
C280-08 Tier 4 Engine Crankshaft Front Seal - Remove and Install
C280-08 Tier 4 Engine Crankshaft Rear Seal - Remove and Install