2014/07/18 Caterpillar


A New Outlet Elbow Is Available for Certain Truck Engines {1307}

Usage:

3126 4ES
Engine:
3126 (S/N: 4ES1-UP)
Truck Engines:
3126E (S/N: G3E1-UP; DPF1-UP; 6ZG1-UP; CKM1-UP; CRP1-UP; HEP1-UP; 9SZ1-UP)
C7 (S/N: NPH1-UP; LBM1-UP)
C7 (S/N: YPG1-UP)
Truck Engine News SEBD6883, 29 October 2013, "A New Outlet Elbow Is Used on Certain C7 Truck Engines". Disregard the previous article, refer to the article that follows.

The new outlet elbow has an improved casting design for controlled quality.

The 438-8638 Outlet Elbow replaces the former 4W-2232 Outlet Elbow on the machines that are listed above.

The 438-8638 Outlet Elbow is adaptable to the machines back to first production.

Use new 6V-3940 Bolts and 9M-1974 Hard Washers when installing the 438-8638 Outlet Elbow.

Caterpillar Information System:

Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060} Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
307, 308, 309 and 310 EXCAVATOR Boom
Disassembly, Assembly, and Installation of the Oil Heater Pumps and Seals for Certain 3600 and C280 Engines{1333} Disassembly, Assembly, and Installation of the Oil Heater Pumps and Seals for Certain 3600 and C280 Engines{1333}
C12.9 Marine Engines Engine Oil and Filter - Change
C8.7 Marine Engine Engine Oil Level - Check
2013/10/01 New Software is Available for Certain Retrofit Selective Catalytic Reduction Systems (SCR) {1900, 1901, 1920}
C18 Generator Set Refill Capacities
PM820, PM822, and PM825 Cold Planer Rotor Bearing Oil Sample - Obtain
2014/12/23 A New Outlet Elbow Is Used on Certain Machine Engines {1307}
2013/10/28 A New Outlet Elbow Is Available for Certain Commercial Engines {1307}
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Sensor Signal (Analog, Passive) - Test
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit CAN Data Link - Test
C12.9 Marine Engines Fuel System Primary Filter/Water Separator - Drain
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057} Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
C12.9 Marine Engines Fumes Disposal Filter Element - Replace - External
C13 and C15 Generator Sets Single Unit Operation
C8.7 Marine Engine Heat Exchanger - Clean/Test
C9 Generator Set Voltage Regulators
TA2 Inspection for C7.1 Industrial Engine{0372, 1000, 7000, 753T, 7565} TA2 Inspection for C7.1 Industrial Engine{0372, 1000, 7000, 753T, 7565}
C8.7 Marine Engine Model View Illustrations
3600 and C280 Diesel Engine Fluids Recommendations Contamination Control
C8.7 Marine Engine Product Description
CX31 and CX31 HT On-Highway Transmissions (Cat Truck) Relief Valve (Transmission Hydraulic Control)
C8.7 Marine Engine Refill Capacities
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.