2013/09/20 Caterpillar


A Rework Procedure for the Power Access Stairway (PAS) On Certain Off-Highway Trucks is Now Available {7253}

Usage:

785D DMC
OEM
CAT WDS (S/N: M3J1-UP)
Off-Highway Truck/Tractor
785D (S/N: DMC1-UP; MSY1-UP)
789D (S/N: SPD1-UP; SHH1-UP)
793D (S/N: FDB1-UP)
793F (S/N: SND1-UP; SSP1-UP; RBT1-UP)
793F AC (S/N: EMD1-UP)
795F AC (S/N: ERM1-UP)
797F (S/N: LAJ1-UP; WSP1-UP)
Service Magazine, SEPD1658, 29, August 2013, "A Rework Procedure for the Power Access Stairway (PAS) On Certain Off-Highway Trucks is Now Available". Disregard this article. Refer to the article that follows.

Description Of Change: The new Tread Plate and the new Seal for the PAS will provide protection for internal components from dirt and debris.



Illustration 1g03422416
View of PAS platform with the new plate and seal.

Table 1
Model  Adaptable To  Effective With 
785D  (S/N: MSY1-591)  (S/N: MSY592-UP) 
785D OEM  (S/N: DMC1-168)  (S/N: DMC169-UP) 
789D  (S/N: SHH1-315; SPD1-566)  (S/N: SHH316-UP; SPD567-UP) 
793D  (S/N: FDB1-1789)  (S/N: FDB1790-UP) 
793F  (S/N: SSP1-922)  (S/N: SSP923-UP) 
793F AC  (S/N: EMD1-77)  (S/N: EMD78-UP) 
793F CMD  (S/N: RBT1-164)  (S/N: RBT165-UP) 
793F XQ  (S/N: SND1-131)  (S/N: SND132-UP) 
795F AC  (S/N: ERM1-278)  (S/N: ERM279-UP) 
797F  (S/N: LAJ1-466)  (S/N: LAJ467-UP) 
797F XQ  (S/N: WSP1-124)  (S/N: WSP125-UP) 
WDS1  (S/N: M3J1-114)  (S/N: M3J115-UP) 

Adaptable To:

Reference: Refer to Special Instruction, REHS8613, "Rework Procedure for the PAS (Powered Access Stairway) on Certain Off-Highway Trucks" for information regarding the Power Access Stairway (PAS) rework instructions.

Table 2
Required Parts 
Qty  Part Number  Description
328-1169 Tread Plate 
141-9203  Screw 
512-9936  Gasket 
425-0997  Plate As 
425-0999  Plate As 
8T-4121  Hard Washer 
N/A Fabricated  Hard Washer 
N/A Fabricated  Hard Washer 

Caterpillar Information System:

2013/09/27 New Software Is Now Available for All Cat® Products With The Product Link 522 System {7606}
Rework Procedure for the PAS (Powered Access Stairway) on Certain Off-Highway Trucks{0679, 7253, 7254, 7255} Rework Procedure for the PAS (Powered Access Stairway) on Certain Off-Highway Trucks{0679, 7253, 7254, 7255}
LC5000, LC6100, and LC7000 Electric Power Generation Exciter Armature - Remove and Install
C280-16 Engine Priority Valve - Install
3512C Petroleum Engines with Dynamic Gas Blending Data Link - Test
C280-16 Engine Auxiliary Water Pump - Install
C280-16 Engine Auxiliary Water Pump - Remove
LC5000, LC6100, and LC7000 Electric Power Generation Rotor - Remove and Install
LC5000, LC6100, and LC7000 Electric Power Generation Terminal Assembly - Remove and Install
LC5000, LC6100, and LC7000 Electric Power Generation Permanent Magnet Pilot Exciter - Remove and Install - PMG
LC5000, LC6100, and LC7000 Electric Power Generation Generator - Remove
LC5000, LC6100, and LC7000 Electric Power Generation Generator - Install
CX31 and CX31 HT On-Highway Transmissions (Cat Truck) Transmission Hydraulic Control
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines Engine Oil Pressure Switch
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 126-8022 Generator through 128-7424 Generator
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 136-6580 Generator through 136-6609 Generator
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 141-5534 Generator through 142-9900 Generator
312D2 and 313D2 Excavators System Pressure Release
3512C Petroleum Engines with Dynamic Gas Blending Engine Shutdown Occurrence
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 144-1666 Generator through 144-1766 Generator
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 136-6610 Generator through 136-6641 Generator
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 144-1964 Generator through 144-2088 Generator
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 149-2447 Generator through 150-9152 Generator
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 158-6410 Generator through 163-8546 Generator
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.