Cylinder Head
Show/hide table
图 1 | g03366241 |
Show/hide table
432-5472 缸盖总成的技术规格 | |||
项目 | 数量 | 零件 | 技术规格说明 |
1 | 16 | 124-1855 螺栓 | 按照以下步骤拧紧缸盖螺栓: 参考图 1 以了解拧紧顺序: 以下螺栓的长度为 以下螺栓的长度为 1. 在螺栓的螺纹上和硬垫圈两侧涂抹 6V-4876 润滑剂。 2. 按照数字顺序,将螺栓 1 至螺栓 26 拧紧至扭矩为 3. 按照数字顺序,将螺栓 1 至螺栓 26 拧紧至扭矩为 4. 按照数字顺序,再次将螺栓 1 至螺栓 26 拧紧至扭矩为 |
2 | 10 | 124-1854 螺栓 |
Show/hide table
图 2 | g03366242 |
俯视图 |
Show/hide table
项目 | 数量 | 零件 | 技术规格说明 |
3 | 20 | 3B-0645 杯塞 | 在装配前,将 Loctite 11358 涂抹到杯塞的孔上。
安装深度为 |
4 | - | 3B-0623 杯塞 | 在装配前,将 Loctite 11358 涂抹到杯塞的孔上。 |
5 | 12 | 166-2904 O 形密封圈 | 在即将装配前,用清洁的 15W-40 发动机机油稍微润滑孔。 |
6 | 6 | 263-4920 喷油器套筒 | 在装配前,将绿色 Loctite 620 涂抹到喷油器套筒下端的压配合直径上。
压装喷油器套筒,直至喷油器套筒在端面 (7) 处触底。 |
Show/hide table
图 3 | g03366243 |
剖面 A-A |
Show/hide table
项目 | 数量 | 零件 | 技术规格说明 |
- | 7 | 216-5582 衬套 | 参考图 3 以便按照以下尺寸安装凸轮轴衬套:
尺寸 (H) 为 尺寸 (J) 为 尺寸 (K) 为 尺寸 (L) 为 尺寸 (M) 为 尺寸 (N) 为 尺寸 (P) 为 |
Show/hide table
图 4 | g03366244 |
Show/hide table
项目 | 数量 | 零件 | 技术规格说明 |
R | - | - | 凸轮轴衬套的孔径为 |
S | - | - | 衬套接合处的方向是高于水平 20 ± 5 度。 |
- | - | - | 新缸盖的厚度为 |
Caterpillar Information System:
C4.4 Generator Sets Product Description
2013/04/25 A New Air Cleaner Gp Is Available for Certain 3512C Engines {1051, 1054}
C7.1 Generator Sets Product Installation
TH48-E80 Petroleum Transmission Power Train Electronic Control System Event Codes
C7.1 Marine Engine Check Valve - Remove and Install
G3512H and G3516H Generator Set Engines Valve Mechanism Cover - Remove and Install
G3512H and G3516H Generator Set Engines Engine Oil Pan - Assemble
2013/07/22 A New Oil Mist Detector Mounting Bracket Is Used With Certain 3516C Engines {1336}
C4.4 and C7.1 Engines Electrical Power Supply - Test
3176C and 3196 Engines for Caterpillar Built Machines Electric Starting Motor
C9.3 Marine Engines Flywheel Housing
C9.3 Tier 4 Final Engines Flywheel
3500B Industrial Engines Air Starting Motor
C9.3 Tier 4 Final Engines Flywheel Housing
C9.3 Industrial Engine Flywheel Housing
G3516 Engines Engine Oil Pan
C13, C15, and C18 Tier 4 Final Engines Cylinder Block
G3500 Engines Alternator Mounting
C13 Tier 4 Final Engines Engine to Transmission Adapter
3500 Engines Air Lines
C11 and C13 Engines Engine Oil Filter Base
374F Excavator System Pressure Release
C32 Marine Generator Set Maintenance Interval Schedule
WS273 XD, WS305 XD, WSF273 XD, WSF305 XD, WSP273 and WSP305 Well Stimulation Pumps Gear (Bull) - Remove and Install