Electric Starting Motor
Show/hide table
| |
| 图 1 | g03365828 |
Show/hide table
| 207-1524 电起动马达总成的技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 2 | 6V-8188 螺母 | 接地终端。 拧紧至扭矩为 |
| 2 | 1 | 6V-8188 螺母 | 马达端子。 拧紧至扭矩为 |
| 3 | 1 | 6V-8378 螺母 | 接地端子。 拧紧扭矩至 |
| 4 | 1 | 6V-8188 螺母 | 蓄电池端子螺母（5）最多可使用三个电缆或导线端子。 两个端子最高不低于 0 AWG。
蓄电池端子。 拧紧至扭矩为 |
| 5 | 1 | 6V-8378 螺母 | 开关接线端。 拧紧至扭矩为 |
| 6 | - | - | 马达机架终端。 拧紧至扭矩为 |
| - | - | - | 当从小齿轮端观看电起动马达时，马达顺时针旋转。
无负载 1. 转速为 6900 ± 1800 rpm 2. 电流消耗为 127.5 ± 27.5 安培 3. 电压为 11 V |
| B | - | - | 小齿轮和壳体之间的间隙为 |
Caterpillar Information System:
C9.3 Marine Engines Flywheel Housing
C9.3 Tier 4 Final Engines Flywheel
C9.3 Tier 4 Final Engines Flywheel
C9.3 Tier 4 Final Engines Flywheel
C15 and C18 Industrial Engines Flywheel Housing
C13, C15, and C18 Tier 4 Final Engines Flywheel
G3512H and G3516H Generator Set Engines Engine Oil Pan - Disassemble
G3512H and G3516H Generator Set Engines Engine Oil Pan - Remove and Install
C9.3 Industrial Engine Engine Control Module - Remove and Install
G3512H and G3516H Generator Set Engines Engine Oil Filter Housing - Assemble
G3512H and G3516H Generator Set Engines Engine Oil Filter Housing - Disassemble
C9.3 Tier 4 Final Engines Cylinder Head Valves
C4.4 and C7.1 Engines Electrical Power Supply - Test
2013/07/22 A New Oil Mist Detector Mounting Bracket Is Used With Certain 3516C Engines {1336}
G3512H and G3516H Generator Set Engines Engine Oil Pan - Assemble
G3512H and G3516H Generator Set Engines Valve Mechanism Cover - Remove and Install
C7.1 Marine Engine Check Valve - Remove and Install
TH48-E80 Petroleum Transmission Power Train Electronic Control System Event Codes
C7.1 Generator Sets Product Installation
2013/04/25 A New Air Cleaner Gp Is Available for Certain 3512C Engines {1051, 1054}
C4.4 Generator Sets Product Description
C13, C15, and C18 Tier 4 Final Engines Cylinder Head
3500B Industrial Engines Air Starting Motor
C9.3 Tier 4 Final Engines Flywheel Housing