Flywheel Housing
Show/hide table
Illustration 1 | g03365805 |
Show/hide table
Specification for 189-9374 Flywheel Housing Gp | |||
Item | Qty | Part | Specification Description |
1 | - | - | Apply 1U-8846 Gasket Sealant to all sealing surfaces of the flywheel housing.
The flywheel housing must be assembled and tightened to the cylinder block within 10 minutes. |
Caterpillar Information System:
C9.3 Tier 4 Final Engines Flywheel
C9.3 Tier 4 Final Engines Flywheel
C9.3 Tier 4 Final Engines Flywheel
C15 and C18 Industrial Engines Flywheel Housing
C13, C15, and C18 Tier 4 Final Engines Flywheel
G3512H and G3516H Generator Set Engines Engine Oil Pan - Disassemble
G3512H and G3516H Generator Set Engines Engine Oil Pan - Remove and Install
C9.3 Industrial Engine Engine Control Module - Remove and Install
G3512H and G3516H Generator Set Engines Engine Oil Filter Housing - Assemble
G3512H and G3516H Generator Set Engines Engine Oil Filter Housing - Disassemble
C9.3 Tier 4 Final Engines Cylinder Head Valves
2013/05/10 A New Water Seal Assembly Is Now Used on All 3408 and 3412 Engines {1100, 7555}
3176C and 3196 Engines for Caterpillar Built Machines Electric Starting Motor
C4.4 and C7.1 Engines Electrical Power Supply - Test
2013/07/22 A New Oil Mist Detector Mounting Bracket Is Used With Certain 3516C Engines {1336}
G3512H and G3516H Generator Set Engines Engine Oil Pan - Assemble
G3512H and G3516H Generator Set Engines Valve Mechanism Cover - Remove and Install
C7.1 Marine Engine Check Valve - Remove and Install
TH48-E80 Petroleum Transmission Power Train Electronic Control System Event Codes
C7.1 Generator Sets Product Installation
2013/04/25 A New Air Cleaner Gp Is Available for Certain 3512C Engines {1051, 1054}
C4.4 Generator Sets Product Description
C13, C15, and C18 Tier 4 Final Engines Cylinder Head
3500B Industrial Engines Air Starting Motor