Exhaust Gas Valve (NRS) - Remove and Install
Removal Procedure
Start By:
- Remove the fumes disposal group.
- Remove bolt (2). Disconnect hose assemblies (1) and position the hose assemblies out of the way.
Show/hide table
Illustration 1 | g02131893 |
- Loosen clamp assemblies (3) and (6) .
Show/hide table
Illustration 2 | g02131934 |
- Disconnect two harness assemblies (5) .
- Remove three bolts (4) and exhaust gas valve (NRS) (7) .
Installation Procedure
- Install exhaust gas valve (NRS) (7) in the reverse order of removal.
- Tighten clamp assembly (6) to a torque of 8.5 ± 2 N·m (75 ± 18 lb in).
Caterpillar Information System:
C175-16 Locomotive Engine Fuel System Operation
3516C HD Petroleum Well Service Engines Hydraulic Starting System
3516C HD Petroleum Well Service Engines Jacket Water Cooling Circuit
3516C HD Petroleum Well Service Engines Camshaft
C280-16 Engine Refill Capacities
C7.1 Marine Engine Fuel Priming Pump - Remove and Install
C280-16 Engine Product Description
C4.4 (Mech) Marine Generator Set MCS-3 Engine Crankcase Breather - Replace - Turbocharged Engines
C7.1 Engines for Caterpillar Built Machines Fuel Injection Timing - Check
C4.4 (Mech) Marine Generator Set MCS-3 Severe Service Application
C7.1 Engines for Caterpillar Built Machines Air in Fuel - Test
C175-16 Locomotive Engine Electronic Control Module (ECM)
C18 Locomotive Engine Exhaust Gas Valve (NRS) - Disassemble
C18 Locomotive Engine Exhaust Gas Valve (NRS) - Assemble
C175-16 Locomotive Engine Air Inlet and Exhaust System Operation
C18 Locomotive Engine Exhaust Manifold - Remove and Install - For Series Turbocharger Applications
2013/02/18 A New Compressor Outlet Bracket Is Used for Certain G3512E Engines {1071}
C280-16 Engine Air Shutoff - Test
2014/04/15 An Improved Lip Type Seal and Wear Sleeve Seal Are Now Used in the Transfer Gear Group of Certain 777 Off-Highway Trucks {3159}
C280-16 Engine Aftercooler Condensation - Drain
C280-16 Engine Engine Oil - Change
C280-16 Engine Engine Oil Filter - Change
C280-16 Engine Engine Oil Temperature Regulator - Replace
C18 Locomotive Engine Exhaust Cooler (NRS) - Remove and Install - For Series Turbocharger Applications