Model View Illustrations
Show/hide table
Ilustrasi 1 | g03340389 |
Tampilan samping kanan Genset Kapal Laut C32 (1 ) Generator (2 ) Panel kontrol (3 ) Turbocharger (4) Pembuangan berpendingin air (5) Air cleaner (6) Aftercooler (7) Filter pembuangan asap (8) Modul kontrol elektronik (ECM, Electronic Control Module) (9) Tangki ekspansi untuk sistem mantel air (10) Pompa priming bahan bakar (11) Katup pemilih untuk filter bahan bakar sekunder (12) Filter bahan bakar sekunder (13) Katup pemilih untuk filter oli (14) Tabung pengisian oli (15) Katup pengambilan sampel S·O·S (16) Cincin pengangkat untuk genset (17) Filter bahan bakar sekunder (18) Katup pengambilan sampel oli (19) Motor starter udara |
Show/hide table
Ilustrasi 2 | g03340390 |
Tampilan samping kiri Genset Kapal Laut C32 (20) Tangki ekspansi untuk sistem sirkuit dengan aftercooler terpisah (sistem SCAC, separate circuit aftercooled) (21) Heater mantel air |
Show/hide table
Ilustrasi 3 | g03340395 |
Tampilan depan Genset Kapal Laut C32 (22) Heat exchanger untuk sistem pendinginan mantel air (23) Heat exchanger untuk sistem pendinginan SCAC (24) Pompa air untuk sistem pendinginan SCAC (25) Peredam (26) Pompa air untuk sistem pendinginan mantel air |
Show/hide table
Ilustrasi 4 | g03340393 |
Tampilan atas Genset Kapal Laut C32 (27) Cincin pengangkat untuk generator (28) Cincin pengangkat untuk engine |
Caterpillar Information System:
C32 Marine Generator Set Safety Messages
C3.3B Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
C3.3B Engines for Caterpillar Built Machines Inlet Manifold - Remove and Install
C3.3B Engines for Caterpillar Built Machines Engine Oil Pressure Sensor - Remove and Install
2013/02/06 Different Water Temperature Regulators (Thermostats) are Available for G3600 Engines {1355}
C3.3B Engines for Caterpillar Built Machines Cylinder Head - Remove and Install
C175-16 Marine Propulsion Engines Engine Shutdown Occurrence
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280} 398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
2013/01/21 Software Update For Proper Air Fuel Ratio Controller Operation Of Certain G3408 and G3412 Engines {1901, 1920}
2013/01/21 New Fuel Pressure Regulator and Set Screw Are Used for 3600 and C280 Engines {1252, 1254}
C9.3 Industrial Engine Fumes Disposal Filter Element - Replace - Emission Related Component
C3.3B Engines for Caterpillar Built Machines Crankshaft Position Sensor - Remove and Install
3516C Locomotive Engine and Generator Set Maintenance Interval Schedule
2013/01/29 Improved Software is Now Used for Petroleum Fracturing Transmissions {7620}
2013/03/01 New Suction Screen and Handle Are Used in 3500 Locomotive Engines {1302, 1302}
Work Area Vision System Maintenance Interval Schedule
C1.5 and C2.2 Industrial Engines ECM Auxiliary Output - Test
3512B, 3512C, and 3516B Generator Set Engines with Dynamic Gas Blending Electronic Control System Operation
2013/04/25 A New Hose and Tube Assembly, and Related Components Is Used on Certain C32 Marine Engines {1274}
Cat® Detect Object Detection System Event Codes
3512B, 3512C, and 3516B Generator Set Engines with Dynamic Gas Blending Detonation Sensor
Cat® Detect Object Detection System Configuration Screen
Cat® Detect Object Detection System General Information
Cat® Detect Object Detection System Main Screen