Software Update For Proper Air Fuel Ratio Controller Operation Of Certain G3408 and G3412 Engines {1901, 1920}
- Engine:
- G3408 (S/N: 6NB1-UP)
- G3408C (S/N: BAZ1-UP)
- G3412C (S/N: 6ZM1-UP)
Description of Change: Update the software for the air/fuel ratio controller when installing the new NOx sensor. The new NOx sensor will not communicate with the original software.
Adaptable To: The effective engine serial numbers are listed in table 1.
Update the software to the 428-7692 Engine Ratings Electronic Software Gp when the 372-1187 Nitrogen Oxide Sensor Gp is installed. Refer to Special Instruction, REHS7861 for software installation instructions.
Use the original 318-0653 Engine Ratings Electronic Software Gp if the 304-4209 Nitrogen Oxide Sensor Gp is installed.
Show/hide table
Effective Engine Serial Numbers     | |
---|---|
G3408     | S/N:6NB05081-UP     |
G3408C     | S/N:BAZ02642-UP     |
G3412     | S/N:6ZM03005-UP     |
Caterpillar Information System:
2013/01/21 New Fuel Pressure Regulator and Set Screw Are Used for 3600 and C280 Engines {1252, 1254}
C9.3 Industrial Engine Fumes Disposal Filter Element - Replace - Emission Related Component
C3.3B Engines for Caterpillar Built Machines Crankshaft Position Sensor - Remove and Install
C3.3B Engines for Caterpillar Built Machines Coolant Temperature Sensor - Remove and Install
C3.3B Engines for Caterpillar Built Machines Camshaft Position Sensor - Remove and Install
C3.3B Engines for Caterpillar Built Machines Boost Pressure Sensor - Remove and Install
C32 Marine Generator Set Control Panel - Marine Generator Set Engine Control Panel 3 (MGECP 3)
Air Shutoff Test and Inspection for Certain C7 and C9 Petroleum Engines{1078} Air Shutoff Test and Inspection for Certain C7 and C9 Petroleum Engines{1078}
2013/03/29 New Engine Oil Hoses Are Used on Certain Excavators Equipped with C13 Engines {1308}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000} Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
C32 Auxiliary Engine Belts - Inspect/Adjust/Replace
2013/01/21 New Software is Available for Certain 3512C Petroleum Engines {1901, 1920}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280} 398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
C175-16 Marine Propulsion Engines Engine Shutdown Occurrence
C3.3B Engines for Caterpillar Built Machines Cylinder Head - Remove and Install
2013/02/06 Different Water Temperature Regulators (Thermostats) are Available for G3600 Engines {1355}
C3.3B Engines for Caterpillar Built Machines Engine Oil Pressure Sensor - Remove and Install
C3.3B Engines for Caterpillar Built Machines Inlet Manifold - Remove and Install
C3.3B Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
C32 Marine Generator Set Safety Messages
C32 Marine Generator Set Model View Illustrations
3516C Locomotive Engine and Generator Set Maintenance Interval Schedule
2013/01/29 Improved Software is Now Used for Petroleum Fracturing Transmissions {7620}
2013/03/01 New Suction Screen and Handle Are Used in 3500 Locomotive Engines {1302, 1302}