Engine Oil Pan
Show/hide table
| |
| Illustration 1 | g03174756 |
Show/hide table
| Specification for 304-9607 Oil Pan Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 1 | 6V-4297 O-Ring Seal | Before assembly, apply 5P-3975 Rubber Lubricant to the bores. |
| 2 | 1 | 6V-3908 O-Ring Seal | Before assembly, apply 5P-3975 Rubber Lubricant to the bores. |
| 3 | 2 | 6V-3835 O-Ring Seal | Before assembly, apply 5P-3975 Rubber Lubricant to the bores. |
| 4 | 1 | 6V-5055 O-Ring Seal | Before assembly, apply 5P-3975 Rubber Lubricant to the bores. |
Caterpillar Information System:
C32 Auxiliary Engine Control Panel - Cat Marine Engine Control Panel I (MECP I) (If Equipped)
G3500H 60Hz Generator Sets Spark Plugs - Inspect/Adjust/Replace
3516B Engine Gear Group (Rear) - Remove
3516B Engine Engine Oil Sequence Valves - Remove and Install
C18 Marine Engines Engine Stalls at Low RPM
3516B Engine Flywheel Housing - Remove
Reusability Guidelines for Single Tooth Master Links {0729, 4150, 4169, 4171} Reusability Guidelines for Single Tooth Master Links {0729, 4150, 4169, 4171}
3516B Engine Flywheel - Remove and Install
3516B Engine Crankshaft Front Seal and Wear Sleeve - Install
PM3516 Power Modules Starting Motor - Inspect
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Hoses and Clamps - Inspect/Replace
G3500H 50Hz Generator Sets Generator - Dry
C175-16 and C175-20 Generator Set Engines Engine Oil Pan
C175-16 and C175-20 Generator Set Engines Turbocharger
C175-16 and C175-20 Generator Set Engines Turbocharger
C175-16 and C175-20 Generator Set Engines Turbocharger
2012/12/10 A Revised Application and Installation Guide Is Now Available for Certain Industrial Engines {1000}
C175-16 and C175-20 Generator Set Engines Turbocharger
3516B Engine Gear Group (Rear) - Install
3516B Engine Piston Cooling Jets - Remove and Install
3516B Engine Bearing Clearance - Check
3516B Engine Connecting Rod Bearings - Remove and Install
3516B Engine Crankshaft Main Bearings - Remove
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Wiring Harness (Open Circuit) - Test