Overhaul (Top End)
頂部大修包括汽缸蓋組件的拆卸、檢查和整修。 有些外加組件需更換和維修。
Cat 代理商可提供這些維修和組件, 且 Cat 代理商可確保這些組件在適當的技術規格下運轉。
附註引擎進行大修時,傳動裝置可能也要維修。 請參閱傳動裝置原始設備製造商 (OEM, Original Equipment Manufacturer) 提供的文件。
附註特定發電機組可能會在特定轉速範圍內運轉。 請參閱本"保養建議"操作及保養手冊之 中的表 20,以瞭解有關 1,200 rpm 和 1,500 rpm 發電機組的保養週期。
下列定義說明在大修期間執行維修所用到的術語:
交換 - 您的 Cat 代理商會以符合原始功能規格的零件和您的已磨損零件交換。
檢查 - 請依據 Caterpillar 重複使用性出版物內的說明檢查組件。 請參閱再生零件和回收作業指南, SEBF8029, " 重複使用性或舊零件回收出版物索引"。 建立指南的用意是為了協助 Caterpillar 代理商和客戶節省不必要的支出。 若目前的零件經整修或維修後仍堪用,則無須使用新的零件。 至於未列入重複使用性指南的組件,請參閱維修手冊, "規格"模組。
安裝新品 - 已達零件維修壽命。 此零件無法整修。 替換零件必須為新品。
重建 - 整修此組件以符合重複使用性指南的規範。
更換 - 已達零件維修壽命。 此零件必須以符合功能規格的零件更換。 替換零件可以是新零件、重建零件或舊零件。
若決定不利用 Cat 代理商的服務進行大修,請注意表 1內的建議事項。
Show/hide table
頂部大修 (1) | |
清潔 | 吸入濾網
渦輪增壓器機油的排放濾網(1)(2) |
清潔
檢查 壓力測試 |
後冷卻器芯 (3) |
檢查 | 連桿軸承 (4) |
檢查
交換 |
升降器 |
檢查
重建 交換 |
汽缸蓋總成 |
燃油注油泵 | |
燃油輸送泵 | |
預先潤滑泵 | |
檢查
更換 |
曲軸止推片 |
燃油壓力調節閥 | |
高壓燃油油軌 | |
推桿 | |
翮管 | |
檢查
重建 |
搖臂 |
安裝新品 | 進氣歧管(墊片和密封件) |
排汽歧管(密封件和蛇管) | |
重建
交換 |
渦輪增壓器 |
Show/hide table
(1) | 組件之拆卸和安裝說明請參閱維修手冊, "分解和組合"模組。 |
(2) | 此濾網位於渦輪增壓器的支架上。 |
(3) | 後冷卻器芯之清潔請參閱本操作保養手冊, "後冷卻器芯 - 清潔/測試"主題。 |
(4) | 僅檢查每個汽缸組的二個組件。 此檢查可做為其他相關組件狀況的適當範例。 |
Caterpillar Information System:
C175-16 Marine Engines Overhaul (Major)
CT660 CX31 and CX31 HT On Highway Truck Power Train Electronic Control System Transmission, SPN 3823 - FMI 0
C175-16 Petroleum Generator Set Engines Driven Equipment - Check
CT660 CX31 and CX31 HT On Highway Truck Power Train Electronic Control System Transmission, SPN 177 - FMI 0
Cat® Alarm and Protection System Control Panel Menu (DCU 410)
Cat® Alarm and Protection System Control Panel Soft Keys (DCU 410)
C175-16 Petroleum Generator Set Engines Crankshaft Vibration Damper - Inspect
C9 Industrial Engines Monitoring System - If Equipped
Cat® Alarm and Protection System Control Panel Alarm List (DCU 410)
Cat® Alarm and Protection System Control Panel Start and Stop Engine (DCU 410)
Cat® Alarm and Protection System Control Panel Overview (DCU 410)
Cat® Alarm and Protection System Control Panel System Overview
C15 and C18 Tier 4 Final Engines Belts - Adjust - If Equipped
C3.4B Industrial Engine Fuel System - Prime
C3.4B Industrial Engine Fuel System Primary Filter/Water Separator - Drain
C18 Marine Engine Cooling System - Test
320E and 323E Excavators Equipment Lowering with Engine Stopped
C15 Petroleum Engines Cat Data Link - Test
TA19 Transmission Temperature Sensor (Transmission Oil) - Remove and Install
C9 Industrial Engines Product Description
330F MHPU Mobile Hydraulic Power Unit Machine System Control Valve (Boom Lowering) - Manual
3516C Generator Sets Fuel Injector - Inspect/Adjust
TA19 Transmission Speed Sensor (Transmission Output) - Remove and Install
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators End User License Agreement