Plate Locations and Film Locations
Cat engines are identified with serial numbers, with performance specification numbers, and with arrangement numbers. In some of the cases, modification numbers are used. These numbers are shown on the Serial Number Plate and the Information Plate that are mounted on the engine.
Cat dealers need these numbers in order to determine the components that were included with the engine. This information permits accurate identification of replacement part numbers.
Show/hide table
Illustration 1 | g00123229 |
Typical serial number plate |
The serial number plate is located on the right side of the cylinder block near the rear of the engine.
The following information is stamped on the serial number plate: engine serial number, model and arrangement number.
Show/hide table
Illustration 2 | g00102789 |
The information plate is on the front cover. The following information is stamped on the information plate: engine serial number, engine model, engine arrangement number, maximum altitude for the engine, horsepower, high idle, full load rpm, fuel settings and other information.
Caterpillar Information System:
UPSB220 Uninterruptible Power Supply Alarm Operation
CG137-08 and CG137-12 Industrial Engines Coolant Temperature Is Low
C3.4B Engines for Caterpillar Built Machines Cleanliness of Fuel System Components
Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159} Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}
C7 Engines for Combat and Tactical Vehicles Product Description
2010/12/20 Make Sure that the Radiator Fan for the 3500 Generator Set Engine Operates at the Correct Speed {1356, 1360}
2011/02/09 New Software is Now Used for C9 Industrial Engines {1901, 1902, 1920}
Installation of the Water-Cooled Throttle for G3500C and G3500E Generator Set Engines{1265} Installation of the Water-Cooled Throttle for G3500C and G3500E Generator Set Engines{1265}
C-12 Engine Fuel Injector - Inspect/Adjust
C-12 Engine Engine Valve Lash - Check
C15 and C18 Petroleum Generator Sets Coolant Temperature Regulator - Replace
2010/12/23 The Adapter for the High Pressure Fuel Rail Pressure Sensor Is Not Serviced for C175-16 Generator Set Engines {127A, 1718}
Cat Commercial Diesel Engine Fluids Recommendations Specialty Lubricants
C7 Engines for Combat and Tactical Vehicles Refill Capacities
C3.4B Engines for Caterpillar Built Machines Air Inlet and Exhaust System
2011/01/24 A New Hose for the Air Lines Group Is Used on Certain C18 Marine Engines {1071}
C7 Engines for Combat and Tactical Vehicles Belt Tensioner - Check
UPSB220 Uninterruptible Power Supply Functional System Check
UPSB220 Uninterruptible Power Supply Return to Normal Operation
UPSB220 Uninterruptible Power Supply UPS Characteristics
2010/12/20 Use the Correct Software for C280 Marine Auxiliary Engines Used in Land-Based Applications {7610, 7620}
UPSB220 Uninterruptible Power Supply Display Settings
C3.4B Engines for Caterpillar Built Machines Connecting Rod - Inspect
C3.4B Engines for Caterpillar Built Machines Fuel Injection