3516C Generator Sets Caterpillar


Catalyst (DOC) - Replace

Usage:

3516C SCJ


注意

安装前确保所有部件没有污染物。 污染物可能会导致过早磨损和缩短部件使用寿命。


  1. 拆下 DOC 盖绝缘组件。


    图 1g02718762

  2. 拆下螺栓和上部衬条。 拆下 DOC 盖组件和密封垫。

    注: 不要重复使用密封垫。



    图 2g02718764

  3. 拧松带箍组件 (1) 并拆下。

  4. 拆下螺栓 (2) 和上部固定器组件。

    注: 使用不同的催化器零件号。 为确保正确的重新组装,记录各催化器的拆卸位置。

  5. 将 DOC 催化器组件 (3) 小心地从下部固定器组件上提出。

  6. 如有必要,对其他 DOC 催化器重复此步骤。

  7. 将 DOC 催化器小心降到下部固定器上,确保催化器与壁平齐,以实现正确密封。 确认正确位置。

  8. 将顶部催化器固定器安装到 DOC 上。

  9. 安装所有固定器螺栓。 不要拧紧螺栓。

  10. 安装带箍。 拧紧至扭矩为 10 ± 1 N·m (7.4 ± .7 lb ft)

  11. 将固定器螺栓拧紧至最终扭矩。 关于正确的扭矩,请参阅技术规格, SENR3130, "扭矩技术规格"。

  12. 要想安装 DOC 催化器盖,更换 CEM 法兰下方的所有内部衬条并对准所有螺栓孔。

  13. 安装新密封垫。

  14. 安装 DOC 盖组件。

  15. 更换所有外部衬条。

  16. 更换所有螺栓。

  17. 以圆形方式将所有螺栓拧紧至最终扭矩。 关于正确的扭矩,请参阅技术规格, SENR3130, "扭矩技术规格"。

  18. 确认所有螺栓达到正确的扭矩值。

Caterpillar Information System:

CEM Locomotive Aftertreatment Catalyst (DOC) - Clean/Inspect
793F Off-Highway Truck Machine Systems Solenoid Valve (Automatic Lubrication) - Remove and Install
C6.6 Generator Set Ignition Keyswitch Circuit and Battery Supply Circuit - Test
3508C, 3512C and 3516C Locomotive Engines Cylinder Head
C6.6 Generator Set Data Link Circuit - Test
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561} Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
3508, 3512 and 3516 Generator Set Engines Tachometer Drive - Remove and Install
2010/02/19 A New Fuel Transfer Pump and a New Check Valve Are Now Used on Certain C32 Marine Engines {1256, 1262}
C6.6 Generator Set Fuel Rail Pump Solenoid - Test
C6.6 Generator Set CAN Data Link Circuit - Test
C6.6 Generator Set CID 1779 FMI 08
2010/01/08 Correct Usage of Seals and Spacers on the Valve Mechanism Covers of Some C9 Engines {1107, 7555}
Selecting Connectors and Preparing Cables for Wiring an Uninterruptible Power Supply{4480} Selecting Connectors and Preparing Cables for Wiring an Uninterruptible Power Supply{4480}
C13, C15, and C18 Tier 4 Interim Engines Ether Starting Aid - Test
C27 and C32 Engines for Caterpillar Built Machines Cooling System - Test
C27 and C32 Engines for Caterpillar Built Machines Electronic Unit Injector - Adjust
793F Off-Highway Truck Machine Systems Hoist Electronic Control - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Engine Crankcase Pressure (Blowby) - Test
Bench Test Procedure For A CX35 On-Highway Transmission and a CX35-P800 Petroleum Transmission {3030, 3073} Bench Test Procedure For A CX35 On-Highway Transmission and a CX35-P800 Petroleum Transmission {3030, 3073}
3512E HD Petroleum Engine Product Description
C7 and C9 On-Highway Engines Diesel Particulate Filter Collects Excessive Soot
EMCP4.1/EMCP4.2 General Information
Updating the Wiring Harness of the Engine Brake on Some C15 Engines{1290, 1408, 1900} Updating the Wiring Harness of the Engine Brake on Some C15 Engines{1290, 1408, 1900}
C15 and C18 Petroleum Generator Sets Battery Disconnect Switch - If Equipped
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.