Engine Oil Pump - Disassemble
拆解步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 1P-2320 | 组合式拉拔器 | 1 |
| 8B-7560 | 踏脚板 | 1 | |
| B | 1P-0529 | 手柄 | 1 |
| 1P-0468 | 驱动板 | 1 | |
| 1P-0465 | 驱动板 | 1 | |
| C | 1P-0462 | 驱动板 | 1 |
| 1P-0461 | 驱动板 | 1 | |
| 1P-0529 | 手柄 | 1 | |
开始:
- 拆卸发动机机油泵。
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 卸下螺栓 (2) 、锁紧螺母 (1) 和吸油喇叭口 (3) 。
Show/hide table
 | |
| 图 1 | g01939556 |
- 拆卸惰齿轮 (4) 。
Show/hide table
 | |
| 图 2 | g01939557 |
- 使用工具 (B) 将轴承从怠速齿轮 (4) 内卸下。
- 从驱动齿轮 (5) 上卸下螺栓 (7) 和垫圈 (6) 。
- 使用工具 (A) 从轴上卸下驱动齿轮 (5) 。
- 从泵体 (8) 上卸下螺栓 (16) 、螺栓 (12) 、盖 (11) 和O型密封圈 (15) 。
Show/hide table
 | |
| 图 3 | g01939558 |
- 从泵体 (8) 上卸下轴组件 (9) 和轴组件 (10) 。
- 卸下螺栓 (14) 和压力安全阀 (13) 。
- 从盖 (11) 拆下轴承 (17) 。
Show/hide table
 | |
| 图 4 | g01940293 |
- 使用工具 (C) 从泵体 (8) 上卸下轴承 (18) 。
Show/hide table
 | |
| 图 5 | g01940294 |
Caterpillar Information System:
C7.1 Industrial Engine and Generator Set Inlet Air Temperature Is High
C7.1 Industrial Engine and Generator Set Exhaust Has Excessive White Smoke
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 0190 - FMI 08
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 0190 - FMI 02
G3304B and G3306B Engines Engine Oil Pump - Install
2009/07/01 A New Unloader Kit Is Now Used {1803}
G3304B and G3306B Engines Engine Oil Pump - Remove
3508C, 3512C, and 3516C Locomotive Engines Speed Control - Test
XQ175 Rental Generator Set Single Unit Operation
3500 Engine Emissions Upgrade Groups{1000, 775E} 3500 Engine Emissions Upgrade Groups{1000, 775E}
C18 Marine Engines Product Description
C7.1 Industrial Engine and Generator Set Fuel Consumption Is Excessive
2009/06/15 New Fasteners for the Valve Mechanism Cover {1107, 1120}
C7.1 Industrial Engine and Generator Set Power Is Intermittently Low or Power Cutout Is Intermittent
C7.1 Industrial Engine and Generator Set Acceleration Is Poor or Throttle Response Is Poor
C13 and C15 On-highway Engines Diesel Particulate Filter Has High Ash Load
C7.1 Industrial Engine Fuel Manifold (ARD) - Aftertreatment Regeneration Device
C7.1 Industrial Engine Exhaust Combustion (ARD) - Aftertreatment Regeneration Device
C15 and C18 Tier 4 Final Engines General Information
3508C, 3512C, and 3516C Locomotive Engines Sensor Supply - Test
C7.1 Industrial Engine Electronic Control Wiring Group - Aftertreatment Regeneration Device
2009/08/24 An Improved Camshaft Is Used for G3520C Generator Sets that Are Rated at 1800 rpm {1210}
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages and CX35-P800 Petroleum Transmission MID 027 - CID 0585 - FMI 02