349F and 352F Excavators Machine System Specifications Caterpillar


Relief Valve (Line)

Usage:

352F-VG A9J



图 1g01526499

(1) 锁紧螺母扭矩 ... 24.4 ± 2.7 N·m (18 ± 2 lb ft)

(2) 盖的扭矩 ... 64.9 ± 6.8 N·m (48 ± 5 lb ft)

Caterpillar Information System:

C6.6 Marine Generator Set Indicator Lamps
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Front Lines
C6.6 Marine Generator Set Glossary
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Pilot Lines
C6.6 Marine Generator Set System Overview
319D Excavator Machine System Specifications Pilot Lines - Pump Control and Shuttle Valve
C13, C15, and C18 Generator Set Engines Belt Tightener
C15 Petroleum Generator Set Engines Turbocharger
C9 On-highway Engine Water Lines
345D, 349D and 349D2 Excavator Machine System Specifications Hydraulic Fan Drive Lines
2009/05/04 Update to A New Procedure is Now Available for Troubleshooting the Air Conditioning Compressor Protection Module {1802}
C6.6 Marine Generator Set Gauges and Indicators
C13T-TH35 and C15T-TH35 Petroleum Packages Monitoring System - Dash Lamps and Controls for the Aftertreatment Regeneration Device (ARD)
C6.6 Marine Generator Set Control Panel
345D, 349D and 349D2 Excavator Machine System Specifications Check Valve - Auxiliary Circuit
C6.6 Marine Generator Set Fuel Injection Lines - Install - Standard Fuel Injection Liners
C6.6 Marine Generator Set Fuel Injection Lines - Remove - Standard Fuel Injection Liners
C11 and C13 Engines Engine Oil Pan
C11 and C13 Engines Engine Oil Pan
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Orifice Tube Assembly - Remove and Install
C175-16 and C175-20 Generator Set Engines Aftercooler Coolant Temperature Is High
Upgrade G3516 and G3512 1400 RPM Gas Compression Engines to ADEM 3 and Air/Fuel Ratio Control with a Nitrogen Oxide Sensor {1000, 1408, 1901, 191N} Upgrade G3516 and G3512 1400 RPM Gas Compression Engines to ADEM 3 and Air/Fuel Ratio Control with a Nitrogen Oxide Sensor {1000, 1408, 1901, 191N}
345D, 349D and 349D2 Excavator Machine System Specifications Pump Lines (Main)
C7 Engines for Caterpillar Built Machines Flywheel Housing
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.