Pump Lines (Main)
Show/hide table
| 图 1 | g01527121 |
顶视图 | |
(1) 两个软管组件的扭矩 ... 160 ± 16 N·m (118 ± 12 lb ft)
(2) 弯头组件的扭矩 ... 160 ± 16 N·m (118 ± 12 lb ft)
Caterpillar Information System:
Upgrade G3516 and G3512 1400 RPM Gas Compression Engines to ADEM 3 and Air/Fuel Ratio Control with a Nitrogen Oxide Sensor {1000, 1408, 1901, 191N} Upgrade G3516 and G3512 1400 RPM Gas Compression Engines to ADEM 3 and Air/Fuel Ratio Control with a Nitrogen Oxide Sensor {1000, 1408, 1901, 191N}
C175-16 and C175-20 Generator Set Engines Aftercooler Coolant Temperature Is High
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Orifice Tube Assembly - Remove and Install
C11 and C13 Engines Engine Oil Pan
C11 and C13 Engines Engine Oil Pan
C6.6 Marine Generator Set Fuel Injection Lines - Remove - Standard Fuel Injection Liners
C6.6 Marine Generator Set Fuel Injection Lines - Install - Standard Fuel Injection Liners
345D, 349D and 349D2 Excavator Machine System Specifications Check Valve - Auxiliary Circuit
C6.6 Marine Generator Set Control Panel
C13T-TH35 and C15T-TH35 Petroleum Packages Monitoring System - Dash Lamps and Controls for the Aftertreatment Regeneration Device (ARD)
349F and 352F Excavators Machine System Specifications Relief Valve (Line)
C6.6 Marine Generator Set Indicator Lamps
C7 Engines for Caterpillar Built Machines Flywheel Housing
345D, 349D and 349D2 Excavator Machine System Specifications Front Lines
C6.6 Marine Generator Set Control Panel
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Cooling Lines - Hydraulic Oil
C15 On-highway Engine Exhaust Manifold
C15 On-Highway Engine Exhaust Manifold
345D, 349D and 349D2 Excavator Machine System Specifications Pilot Lines
345D, 349D and 349D2 Excavator Machine System Specifications Return Lines - Boom Float
C6.6 Marine Generator Set Speed Demand Input Setup
C6.6 Marine Generator Set EMCP3 Component Location
C6.6 Marine Generator Set ECM Will Not Accept Factory Passwords
C15 On-highway Engine BrakeSaver Control Valve