Front Lines
Show/hide table
| 图 1 | g01994836 |
顶视图 | |
注: 所有电缆带的各个切割边处不允许有尖角。
注: 将 154-9731 螺纹锁固胶 涂抹到单向阀组件 (1) 的螺纹上。
(1) 单向阀组件的扭矩 ... 35 ± 4 N·m (26 ± 3 lb ft)
Show/hide table
 | |
| 图 2 | g01994837 |
右视图 | |
(2) 两个安全阀总成的扭矩 ... 82 ± 7 N·m (60 ± 5 lb ft)
(3) 单向阀总成的扭矩 ... 400 ± 30 N·m (295 ± 22 lb ft)
(4) 四只螺栓的扭矩 ... 50 ± 10 N·m (37 ± 7 lb ft)
Caterpillar Information System:
C6.6 Marine Generator Set Glossary
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Pilot Lines
C6.6 Marine Generator Set System Overview
319D Excavator Machine System Specifications Pilot Lines - Pump Control and Shuttle Valve
C13, C15, and C18 Generator Set Engines Belt Tightener
C15 Petroleum Generator Set Engines Turbocharger
C9 On-highway Engine Water Lines
345D, 349D and 349D2 Excavator Machine System Specifications Hydraulic Fan Drive Lines
2009/05/04 Update to A New Procedure is Now Available for Troubleshooting the Air Conditioning Compressor Protection Module {1802}
C6.6 Marine Generator Set Gauges and Indicators
C13T-TH35 and C15T-TH35 Petroleum Packages Configuration Parameters - Customer Specified Parameters
2008/05/26 An Improved Mounting of the Alternator Belt Guard Is Now Used {7174, 7553}
C6.6 Marine Generator Set Indicator Lamps
349F and 352F Excavators Machine System Specifications Relief Valve (Line)
C13T-TH35 and C15T-TH35 Petroleum Packages Monitoring System - Dash Lamps and Controls for the Aftertreatment Regeneration Device (ARD)
C6.6 Marine Generator Set Control Panel
345D, 349D and 349D2 Excavator Machine System Specifications Check Valve - Auxiliary Circuit
C6.6 Marine Generator Set Fuel Injection Lines - Install - Standard Fuel Injection Liners
C6.6 Marine Generator Set Fuel Injection Lines - Remove - Standard Fuel Injection Liners
C11 and C13 Engines Engine Oil Pan
C11 and C13 Engines Engine Oil Pan
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Orifice Tube Assembly - Remove and Install
C175-16 and C175-20 Generator Set Engines Aftercooler Coolant Temperature Is High
Upgrade G3516 and G3512 1400 RPM Gas Compression Engines to ADEM 3 and Air/Fuel Ratio Control with a Nitrogen Oxide Sensor {1000, 1408, 1901, 191N} Upgrade G3516 and G3512 1400 RPM Gas Compression Engines to ADEM 3 and Air/Fuel Ratio Control with a Nitrogen Oxide Sensor {1000, 1408, 1901, 191N}