Cooling System Package (Radiator, Aftercooler, Oil Cooler) - Remove and Install
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 439-3940 | Link Bracket | 2 |
Start By:
- Remove engine side guards.
- Remove hood.
- Remove fan guard.
- Drain the coolant. Refer to Operation and Maintenance Manual, ""Cooling System Coolant (ELC) - Change""for the correct draining and filling procedures
- Drain the hydraulic oil. Refer to Operation and Maintenance Manual, "Hydraulic System Oil – Change" for the correct draining and filling procedures.
Show/hide table
Illustration 1 g03849001 - Disconnect harness assembly (1).
Show/hide table
Illustration 2 g03849108 - Disconnect hose (2). Disconnect hose assemblies (3).
Show/hide table
Illustration 3 g03849555 - Install Tooling (A) and attach suitable lifting device. The weight of system cooling package (4) is approximately
318 kg (700 lb) .Show/hide tableIllustration 4 g03850352 View of right side of cooling package from above. - Loosen bolts (5). Repeat for the other side.
Show/hide table
Illustration 5 g03850421 View from below machine. - Remove bolts (6). Repeat for other side.
Show/hide table
Illustration 6 g03850459 - Remove cooling system package (4).
- Install cooling system package (4) in the reverse order of removal.
Caterpillar Information System:
980L Wheel Loader Fuel System Primary Filter (Water Separator) - Drain
D8R and D8T Track-Type Tractors Mirror - If Equipped
VIMS Application Module for Payload Now Available for Certain Underground Articulated Trucks {7610, 7620} VIMS Application Module for Payload Now Available for Certain Underground Articulated Trucks {7610, 7620}
D11R Track-Type Tractor C32 Engine Retrofit Supplement Cooling System Coolant (ELC) - Change
D11R Track-Type Tractor C32 Engine Retrofit Supplement Cooler Cores and A/C Condenser - Clean
D11R Track-Type Tractor C32 Engine Retrofit Supplement Breaker Relief Valve (Expansion Tank) - Replace - If Equipped
D8R and D8T Track-Type Tractors Plate Locations and Film Locations
D8R and D8T Track-Type Tractors Specifications
D8R and D8T Track-Type Tractors Additional Messages
D8R and D8T Track-Type Tractors Safety Messages
D8R and D8T Track-Type Tractors Stopping the Machine
D11R Track-Type Tractor C32 Engine Retrofit Supplement Belt - Inspect/Replace
3516E Engine for 994K Wheel Loaders Cooling Fan Speed - Test
D11R Track-Type Tractor C32 Engine Retrofit Supplement Cooling System Coolant Extender (ELC) - Add
3516E Engines for 793D Off-Highway Trucks Cooling Fan - Calibrate
D11R Track-Type Tractor C32 Engine Retrofit Supplement Cooling System Coolant Level - Check
3516E Engine for 994K Wheel Loaders Oil Level Is Low
D11R Track-Type Tractor C32 Engine Retrofit Supplement Cooling System Coolant Sample (Level 2) - Obtain
D11R Track-Type Tractor C32 Engine Retrofit Supplement Cooling System Water Temperature Regulator - Replace
D11R Track-Type Tractor C32 Engine Retrofit Supplement Electronic Unit Injector - Inspect/Adjust
2015/06/25 Cat® Reman Announces the Availability of Additional Engine Components for Certain Machine Applications {1000, 1052, 1053, 1210, 1251, 1252, 1254, 1265, 1290, 1405, 1713, 1901, 7490, 7610, 7620}
980L Wheel Loader Hydraulic System Oil Sample - Obtain
Sorting Grapple Fork (Log and Lumber) Specifications
2015/06/25 Cat® Reman Announces Additions to the Fuel Air Ratio Controls Portfolio for Certain Machine Applications {1278}