2009/02/02 Caterpillar


A New Pushrod Is Now Used {1102, 1121, 1123}

Usage:

3126B 3GS
Engine:
3126B (S/N: BEJ1-UP; DCS1-UP)
C-9 (S/N: CLJ1-UP)
C7 (S/N: JRA1-UP; JTF1-UP; FML1-UP; FMM1-UP)
C9 (S/N: SRB1-UP; LFE1-UP; CKP1-UP; X3R1-UP)
Generator Set:
C9 MARINE GEN (S/N: SJB1-UP)
C9 MARINE GS (S/N: C9A1-UP)
Industrial Engine:
C9 INDUSTRIAL (S/N: JSC1-UP; MBD1-UP; JLW1-UP)
Marine Engine:
3126B MARINE (S/N: 3GS1-UP)
C7 MARINE (S/N: C7B1-UP; C7D1-UP; C7X1-UP; C7Z1-UP)
C9 MARINE (S/N: CSN1-UP; X9X1-UP; Z9X1-UP)
Engine News SEBD9442, 23 April 2007, "A New Pushrod Is Now Used for Parts Service". Disregard this article. Refer to the following article.

Description of Change: A new pushrod is now used for all engines that are listed above. The new pushrod is more resistant to bending.

Adaptable To: 264-6156 Valve Push Rod is a direct replacement of 133-6379 Valve Push Rod. Refer to Table 1 for a list of effective serial numbers.

Table 1
Effective Serial Numbers    
S/N:JSC01432-UP     S/N:JLW00678-UP     S/N:CKP00713-UP    
S/N:LFE00012-UP     S/N:SRB00121-UP     S/N:S9L00649-UP    
S/N:3GS02252-UP     S/N:X9X00739-UP     S/N:BEJ14582-UP    
S/N:C7X00867-UP     S/N:CLJ11981-UP     S/N:CSN01131-UP    
S/N:JTF00773-UP     S/N:C7D00272-UP     S/N:FMM04791-UP    
S/N:DCS03031-UP     S/N:JRA00333-UP     S/N:C7B00328-UP    
S/N:C7Z00249-UP     S/N:SJB00309-UP     S/N:MBD03144-UP    
S/N:C9A00670-UP     S/N:Z9X00340-UP     S/N:FML01749-UP    

Caterpillar Information System:

3512B Marine Auxiliary Engine Overhaul (Top End)
2007/04/02 Make Sure That The Turbocharger Coolant Is Vented {1052}
C9 Agricultural Engine for Challenger Tractors Sensor Supply - Test
C18 Generator set and C18 Marine Engines Valve Mechanism Cover Base - Remove and Install
C9 Agricultural Engine for Challenger Tractors Acceleration Is Poor or Throttle Response Is Poor
C18 Generator set and C18 Marine Engines Housing (Front) - Install
C3.4 Engines for Caterpillar Built Machines Fuel Injection Pump
C9 Agricultural Engine for Challenger Tractors Event Code List
Procedure to Replace the Solenoid on the Electronic Actuator Group{1716} Procedure to Replace the Solenoid on the Electronic Actuator Group{1716}
C18 Generator set and C18 Marine Engines Housing (Front) - Remove
C9 On-highway Engine Exhaust Combustion Manifold - Remove and Install
C13 On-highway Engine Inspection{1000, 1052, 1091, 1307, 1359} C13 On-highway Engine Inspection{1000, 1052, 1091, 1307, 1359}
C32 Marine and Auxiliary Marine Engines Vibration Damper and Pulley - Remove and Install
C9 Agricultural Engine for Challenger Tractors Engine Misfires, Runs Rough or Is Unstable
2007/04/09 An Improved Clamp is Used {1355, 1380, 1393}
C18 Marine Auxiliary Engines Switch Circuits - Test
TA19 and TA22 Transmissions Power Train Electronic Control System Event Code List
C18 Marine Auxiliary Engines Indicator Lamp - Test
C32 Marine and Auxiliary Marine Engines Housing (Front) - Remove
3512B Marine Auxiliary Engine Safety Messages
Filtration Procedure for Oil in the Motor Grader Tandem Drive {0680, 0738, 0768, 4062, 4064} Filtration Procedure for Oil in the Motor Grader Tandem Drive {0680, 0738, 0768, 4062, 4064}
C32 Petroleum Engines Belts - Inspect/Adjust/Replace
C32 Marine Engines Housing (Front) - Install
C18 Marine Auxiliary Engines Engine Top Speed Is Not Obtained
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.