- Wheel Tractor-Scraper:
- 623H (S/N: EJD1-UP; DBF1-UP)
Description of Change: Cutting edge mounting plate has been updated on the above mentioned scrapers. The updated plate allows the strap adapters for the ripper teeth to be installed over the cutting edge and mounting plate.
Adaptable To: Use the following procedure to rework the existing 372-6128 Plate .
Show/hide table
|
Do not operate or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Cat dealer for replacement manuals. Proper care is your responsibility. |
|
Show/hide table
|
|
|
Illustration 1 | g03354169 |
- Remove center cutting edge (A) .
Show/hide table
|
|
|
Illustration 2 | g03354170 |
Show/hide table
|
|
|
Illustration 3 | g03354171 |
Side view of the cutting edge with the side of the bowl removed for clarity |
- Cut or grind a 45 degree bevel into the bottom side of 372-6128 Plate (B) .
Show/hide table
|
|
|
Illustration 4 | g03354172 |
View of plate (B) after grinding the 45 degree bevel |
Show/hide table
|
|
|
Illustration 5 | g03354173 |
- Reinstall center cutting edge (A) .
The updated
372-6128 Plate allowing the
9J-2307 Strap Adapter for ripper teeth to be installed over the cutting edge is now adaptable to machines (S/N: EJD1-105; DBF1-144), and effective in production with machines (S/N: EJD106-UP; DBF145-UP).