C7.1 Engines for Caterpillar Built Machines Caterpillar


Fuel Injection Timing - Check

Usage:

525D 2L5

表 1
所需工具 
工具  零件号  零件描述  数量 
A(1)   9U-6198  曲轴转动工具 
A(2)   9U-7336  壳体 
5P-7305 发动机盘车工具 
230-6284  正时销(凸轮轴) 
136-4632  正时销(曲轴) 
268-1966 适配器 
(1) 曲轴转动工具用于前皮带轮。
(2) 该工具在电动起动马达的孔上使用。

  1. 使用工具 (A) 沿正常旋转方向旋转曲轴,直到 1 号活塞处于上止点位置。 有关正确的步骤,请参阅系统操作、测试和调整, "查找 1 号活塞上止点位置"。

  2. 确保齿轮上的正时标记对齐。

  3. 如果喷油泵的轴不在图 1 中所示的位置,则喷油泵正时可能不正确。 如有必要,拆下喷油泵。 请参阅拆解和组装以了解正确步骤。


    图 1g03347244
    典型实例

  4. 如有必要,安装喷油泵。 请参阅拆解和组装以了解正确步骤。 确保喷油泵轴在图 1 中所示的正确位置。 角度 (Y) 应为 43 度。 角度 (Z) 应为 18 度。

Caterpillar Information System:

C7.1 Engines for Caterpillar Built Machines Air in Fuel - Test
C7.1 Engines for Caterpillar Built Machines Glossary of Electronic Control Terms
C7.1 Engines for Caterpillar Built Machines Power Sources
Buffer Seal Assembly May Wear and Cause Leaks in the head of the Lift Cylinder on Certain Track-Type Tractors and Wheel Dozers{5102} Buffer Seal Assembly May Wear and Cause Leaks in the head of the Lift Cylinder on Certain Track-Type Tractors and Wheel Dozers{5102}
C7.1 Engines for Caterpillar Built Machines Electronic Control System
336F MHPU Mobile Hydraulic Power Unit Machine System Specifications Control Valve
336F and 340F Excavators Machine System Specifications Swing Gear and Bearing
259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Machine Systems Refrigerant Condenser - Remove and Install
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Manual Valve - Remove and Install
2013/02/19 An Improved Transmission Pressure Sensor is Now Used on Certain Pipelayer, Track-Type Loaders, and Track-Type Tractors {1408}
Procedure to Install an Improved Air Cleaner Group for the Rear Engine on Certain 627H Wheel Tractor-Scrapers{1051} Procedure to Install an Improved Air Cleaner Group for the Rear Engine on Certain 627H Wheel Tractor-Scrapers{1051}
The Quick Coupler Can be Activated from the Soft Panel Switch for 387-3167 Valve and Lines Gp-Coupler Kit on Certain 980K Wheel Loaders{1408, 1435, 5057, 5133, 6129} The Quick Coupler Can be Activated from the Soft Panel Switch for 387-3167 Valve and Lines Gp-Coupler Kit on Certain 980K Wheel Loaders{1408, 1435, 5057, 5133, 6129}
990K Wheel Loader Fuel Tank Cap and Strainer - Clean
Rear Axle Bolted Joint Modified On Certain 994H Wheel Loaders {3013, 3268, 3278} Rear Axle Bolted Joint Modified On Certain 994H Wheel Loaders {3013, 3268, 3278}
990K Wheel Loader Fuel Tank Water and Sediment - Drain
D10T2 Track-Type Tractor Sensor Supply - Test
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Diesel Exhaust Fluid Module - Remove and Install
D10T2 Track-Type Tractor Systems Inlet Manifold
903C Compact Wheel Loader Safety Messages - Work Tools
986H Wheel Loader Machine Systems Piston Pump (Brake) Pressure - Test and Adjust
901C, 902C and 903C Compact Wheel Loaders Emissions Certification Film
D8T, D9T and D10T2 Track-Type Tractors VIMSTM 3G / Product LinkTM Diagnostic Trouble Codes
903C Compact Wheel Loader Equipment Lowering with Engine Stopped
986H Wheel Loader Machine Systems General Information (Steering System) - HMU Steering
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.