336F MHPU Mobile Hydraulic Power Unit Machine System Specifications Caterpillar

Control Valve

Usage:

336F B34

Show/hide table




Illustration 1	g03347119

Show/hide table

Table 1
Specification for 369-8455 Control Valve Gp
Item	Qty	Part	Specification Description
1	7	225-4818 Plug As	Torque to 10 ± 1 N·m (89 ± 9 lb in).
2	2	310-0203 Solenoid Valve Gp	Lubricate the bore lightly with lubricant that is being sealed.
2	2	310-0203 Solenoid Valve Gp	Torque to 78 ± 5 N·m (58 ± 4 lb ft).
3	2	225-4820 Plug As	Torque to 23 ± 2 N·m (204 ± 18 lb in).
4	1	335-0376 Solenoid and Pressure Reducing Valve Gp	Lubricate the bore lightly with lubricant that is being sealed.
5	2	7I-2272 Bolt	Torque to 7 ± 1 N·m (62 ± 9 lb in).
6	2	255-5762 Plug	Torque to 170 ± 17 N·m (125 ± 13 lb ft).
7	2	4I-6397 Backup Ring	Lubricate lightly with the lubricant that is being sealed.
8	2	6V-3922 O-Ring Seal	Lubricate lightly with the lubricant that is being sealed.
9	2	323-7599 Check Valve Spring	Length under test force is 34.50 mm (1.358 inch).
			Test force is 15.5 ± 0.8 N (3.5 ± 0.2 lb).
			Free length after test is 38.55 mm (1.518 inch).
10	1	335-0266 Stop Plug	Torque to 105 ± 10 N·m (77 ± 7 lb ft).
11	3	335-0264 Stop Plug	Torque to 270 ± 27 N·m (199 ± 20 lb ft).
12	2	153-5288 Spring	Length under test force is 52.5 mm (2.07 inch).
			Test force is 145.4 ± 7.3 N (32.7 ± 1.6 lb).
			Free length after test is 55.7 mm (2.19 inch).
13	1	335-0265 Stop Plug	Torque to 170 ± 17 N·m (125 ± 13 lb ft).
14	1	285-1418 Spring	Length under test force is 61.50 mm (2.421 inch).
			Test force is 212.4 ± 10.6 N (47.8 ± 2.4 lb).
			Free length after test is 77.300 mm (3.0433 inch).
15	1	335-0199 Connector As	Torque to 105 ± 10 N·m (77 ± 7 lb ft).
16	1	114-0623 Nut	Torque to 7.4 ± 0.5 N·m (65.5 ± 4.4 lb in).
17	1	095-1584 O-Ring Seal	Lubricate lightly with the lubricant that is being sealed.
18	1	095-1783 Backup Ring	Lubricate lightly with the lubricant that is being sealed.
19	1	095-8024 Backup Ring	Lubricate lightly with the lubricant that is being sealed.
20	1	095-1578 O-Ring Seal	Lubricate lightly with the lubricant that is being sealed.

Caterpillar Information System:

336F and 340F Excavators Machine System Specifications Swing Gear and Bearing

259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Machine Systems Refrigerant Condenser - Remove and Install

966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Manual Valve - Remove and Install

2013/02/19 An Improved Transmission Pressure Sensor is Now Used on Certain Pipelayer, Track-Type Loaders, and Track-Type Tractors {1408}

Procedure to Install an Improved Air Cleaner Group for the Rear Engine on Certain 627H Wheel Tractor-Scrapers{1051} Procedure to Install an Improved Air Cleaner Group for the Rear Engine on Certain 627H Wheel Tractor-Scrapers{1051}

The Quick Coupler Can be Activated from the Soft Panel Switch for 387-3167 Valve and Lines Gp-Coupler Kit on Certain 980K Wheel Loaders{1408, 1435, 5057, 5133, 6129} The Quick Coupler Can be Activated from the Soft Panel Switch for 387-3167 Valve and Lines Gp-Coupler Kit on Certain 980K Wheel Loaders{1408, 1435, 5057, 5133, 6129}

C7.1 Engines for Caterpillar Built Machines Fuel Injection

C7.1 Engines for Caterpillar Built Machines Turbocharger - Inspect

C7.1 Engines for Caterpillar Built Machines Air Inlet and Exhaust System - Inspect

C7.1 Engines for Caterpillar Built Machines Air Inlet and Exhaust System

C7.1 Engines for Caterpillar Built Machines Basic Engine

C7.1 Engines for Caterpillar Built Machines Introduction

C7.1 Engines for Caterpillar Built Machines Electronic Control System

Buffer Seal Assembly May Wear and Cause Leaks in the head of the Lift Cylinder on Certain Track-Type Tractors and Wheel Dozers{5102} Buffer Seal Assembly May Wear and Cause Leaks in the head of the Lift Cylinder on Certain Track-Type Tractors and Wheel Dozers{5102}

C7.1 Engines for Caterpillar Built Machines Power Sources

C7.1 Engines for Caterpillar Built Machines Glossary of Electronic Control Terms

C7.1 Engines for Caterpillar Built Machines Air in Fuel - Test

C7.1 Engines for Caterpillar Built Machines Fuel Injection Timing - Check

990K Wheel Loader Fuel Tank Cap and Strainer - Clean

Rear Axle Bolted Joint Modified On Certain 994H Wheel Loaders {3013, 3268, 3278} Rear Axle Bolted Joint Modified On Certain 994H Wheel Loaders {3013, 3268, 3278}

990K Wheel Loader Fuel Tank Water and Sediment - Drain

D10T2 Track-Type Tractor Sensor Supply - Test

966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Diesel Exhaust Fluid Module - Remove and Install

D10T2 Track-Type Tractor Systems Inlet Manifold