336F and 340F Excavators Machine System Specifications Caterpillar


Swing Gear and Bearing

Usage:

336F LN DKF


Illustration 1g03346834
Typical example
Top view

Table 1
Item  Qty  Part  Specification Description 
Position "S" that is on inner race (3) relative to the carbody assembly (1) and bearing stopper (2). Refer to Illustration 1. 


Illustration 2g03346835

Table 2
Item  Qty  Part  Specification Description 
Bolt  Before assembly, apply blue Loctite 242 to the threads. 
Torque to 20 ± 2 N·m (177 ± 18 lb in).(1)
Torque to 37 ± 4 N·m (27 ± 3 lb ft).
7Y-1650 Hose Clamp  Torque to 5.39 ± 0.49 N·m (47.71 ± 4.34 lb in)
Bolt  Before assembly, apply blue Loctite 242 to the threads. 
Torque to 37 ± 4 N·m (27 ± 3 lb ft).
7Y-1095 Dowel  Before assembly, apply Loctite C5A Cooper Anti-Seize to dowel holes. 
Apply sealant between the mating surfaces of the gear group and upper frame assembly. Apply sealant between the mating surfaces of the gear group and carbody assembly. 
Bolt  Before assembly, apply blue Loctite 242 to the threads. 
Torque to 20 ± 2 N·m (177 ± 18 lb in).
10  15  Bolt  Before assembly, apply Loctite C5A Cooper Anti-Seize to the threads. Do not apply Anti-seize Compound to the seats of the bolts or to the washer faces. 
Torque to 1000 ± 125 N·m (738 ± 92 lb ft).
11  —  112-1531 Bolt  Before assembly, apply Loctite C5A Cooper Anti-Seize to the threads. Do not apply Anti-seize Compound to the seats of the bolts or to the washer faces. 
Torque to 1000 ± 125 N·m (738 ± 92 lb ft).
12  31  Bolt  Before assembly, apply Loctite C5A Cooper Anti-Seize to the threads. Do not apply Anti-seize Compound to the seats of the bolts or to the washer faces. 
Torque to 1000 ± 125 N·m (738 ± 92 lb ft).
(1) For 296-6308.

Caterpillar Information System:

259D, 279D, 289D, 299D and 299D XHP Compact Track Loaders, 257D, 277D, 287D, 297D and 297D XHP Multi Terrain Loaders and 236D, 242D, 246D, 262D, 272D and 272D XHP Skid Steer Loaders Machine Systems Refrigerant Condenser - Remove and Install
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Manual Valve - Remove and Install
2013/02/19 An Improved Transmission Pressure Sensor is Now Used on Certain Pipelayer, Track-Type Loaders, and Track-Type Tractors {1408}
Procedure to Install an Improved Air Cleaner Group for the Rear Engine on Certain 627H Wheel Tractor-Scrapers{1051} Procedure to Install an Improved Air Cleaner Group for the Rear Engine on Certain 627H Wheel Tractor-Scrapers{1051}
The Quick Coupler Can be Activated from the Soft Panel Switch for 387-3167 Valve and Lines Gp-Coupler Kit on Certain 980K Wheel Loaders{1408, 1435, 5057, 5133, 6129} The Quick Coupler Can be Activated from the Soft Panel Switch for 387-3167 Valve and Lines Gp-Coupler Kit on Certain 980K Wheel Loaders{1408, 1435, 5057, 5133, 6129}
C7.1 Engines for Caterpillar Built Machines Fuel Injection
C7.1 Engines for Caterpillar Built Machines Turbocharger - Inspect
C7.1 Engines for Caterpillar Built Machines Air Inlet and Exhaust System - Inspect
C7.1 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
C7.1 Engines for Caterpillar Built Machines Basic Engine
C7.1 Engines for Caterpillar Built Machines Introduction
C7.1 Engines for Caterpillar Built Machines Compression - Test
336F MHPU Mobile Hydraulic Power Unit Machine System Specifications Control Valve
C7.1 Engines for Caterpillar Built Machines Electronic Control System
Buffer Seal Assembly May Wear and Cause Leaks in the head of the Lift Cylinder on Certain Track-Type Tractors and Wheel Dozers{5102} Buffer Seal Assembly May Wear and Cause Leaks in the head of the Lift Cylinder on Certain Track-Type Tractors and Wheel Dozers{5102}
C7.1 Engines for Caterpillar Built Machines Power Sources
C7.1 Engines for Caterpillar Built Machines Glossary of Electronic Control Terms
C7.1 Engines for Caterpillar Built Machines Air in Fuel - Test
C7.1 Engines for Caterpillar Built Machines Fuel Injection Timing - Check
990K Wheel Loader Fuel Tank Cap and Strainer - Clean
Rear Axle Bolted Joint Modified On Certain 994H Wheel Loaders {3013, 3268, 3278} Rear Axle Bolted Joint Modified On Certain 994H Wheel Loaders {3013, 3268, 3278}
990K Wheel Loader Fuel Tank Water and Sediment - Drain
D10T2 Track-Type Tractor Sensor Supply - Test
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Diesel Exhaust Fluid Module - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.