Engine Oil Filter Base - Remove
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 185-3630     | 带式扳手总成     | 1     |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 使用工具 (A) 拆下机油滤清器 (4) 。
Show/hide table
图 1 | g01256974 |
- 断开软管组件 (1) 。
- 拆下将机油滤清器底座 (3) 固定到缸体上的螺栓 (2) 和垫圈。 拆下发动机机油滤清器底座 (3) 。
Caterpillar Information System:
AccuGrade® GPS (CD700) Radio Utility
C7 On-highway Engine Idler Pulley
AccuGrade® GPS (CD700) Flashing Messages
G3508, G3512 and G3516 Engines Crankshaft - Install
C7 PETROLEUM Petroleum Engine Inlet and Exhaust Valves - Remove and Install
C13 and C15 On-Highway Engines Emissions Certification Film
C7 PETROLEUM Petroleum Engine Inlet and Exhaust Valve Springs - Remove and Install
Air Conditioning and Heating R134a for All Caterpillar Machines Identifying the Air Conditioning System
C280 Marine Propulsion Engines Intermittent Engine Shutdown
C280 Marine Auxiliary Engines Self-Diagnostics
G3508, G3512 and G3516 Engines Crankshaft - Remove
C7 On-Highway Engine Clean Gas Induction Cooler - Remove and Install
G3500 A3 Engines Grounding Practices
G3500 A3 Engines General Information (Electronic Control System)
AccuGrade® GPS (CD700) Receiver Firmware Upgrade
AccuGrade® GPS (CD700) Display Firmware Upgrade
AccuGrade® GPS (CD700) Sensor Firmware Upgrade
C15 Industrial Engine Powertrain Data Link Circuit - Test
C7 PETROLEUM Petroleum Engine Engine Oil Filter Base - Disassemble
C7 On-Highway Engine Clean Gas Induction Valve - Remove
2006/03/27 Sealing and Installing the Flywheel Housing {1157, 7555}
G3500 A3 Engines Engine Governing - Adjust
C7 PETROLEUM Petroleum Engine Engine Oil Filter Base - Assemble
C7 On-highway Engine Fuel Filter Base