Accessory Drive (Front) - Remove - Engine Oil Pump and Water Pump
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件描述 | 数量 |
A | - | 压紧螺钉 3/8 - 16 × 1 1/2 in |
2 |
B | - | 压紧螺钉 1/2 - 13 × 1 1/2 in |
2 |
开始:
- 拆卸辅助水泵。 请参考拆解和组装, "辅助水泵 - 拆卸"。
- 拆卸发动机机油泵。 请参阅拆解和组装, "发动机机油泵 - 拆卸"。
- 拆下水泵。 请参阅拆解和组装, "水泵 - 拆卸"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损並縮短部件使用寿命。 |
- 拆下螺栓 (2)。
- 用工具 (A)将泵接头组件 (1)从前壳体 (3)上拆下。 将 O 形密封圈从泵接头组件上拆下。
Show/hide table
图 2 g01132545 - 拆下螺栓 (4)。
- 用工具 (B)将泵接头组件 (5)从前壳体 (3)上拆下。 将 O 形密封圈从泵接头组件上拆下。
Show/hide table
图 1 | g01132543 |
Caterpillar Information System:
Electronic Injector Height Adjustment and Setting{1251, 1290} Electronic Injector Height Adjustment and Setting{1251, 1290}
3512C and 3516C Engines Engine Speed/Timing Sensor
3512C and 3516C Engines Engine Control Switch (ECS)
C15 and C18 Generator Set Engines Crankshaft Position Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines E539 High Intake Manifold Air Temperature
24M Motor Grader Machine Systems Alarm (Action)
3512C and 3516C Engines Emergency Stop Switch (Remote)
C9 Industrial Engines Reference Material
C15 and C18 Generator Set Engines Camshaft Position Sensor - Remove and Install
C15 and C18 Generator Set Engines Fuel Pressure Sensor - Remove and Install
C15 and C18 Generator Set Engines Fuel Temperature Sensor - Remove and Install
3512C and 3516C Engines Electrical Power Supply
C15 and C18 Generator Set Engines E197 High Engine Oil Temperature
3512C and 3516C Engines Prelubrication System
3512 Industrial Engine Engine Design
C15 and C18 Generator Set Engines E085 Engine Shutdown Overridden
Procedure for Adding Filtration Capability to Solvent Stands {0680} Procedure for Adding Filtration Capability to Solvent Stands {0680}
3508C, 3512C and 3516C Marine Engines Accessory Drive (Front) - Install - Engine Oil Pump and Water Pump
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Pager Configuration
C15 and C18 Generator Set Engines Event Codes
C9 On-highway Engine Water Temperature Regulator Housing
C7 Marine Engines Electronic Control Module - Remove and Install
3508C, 3512C and 3516C Marine Engines Housing (Front) - Remove
C7 Marine Engines Unit Injector Hydraulic Pump - Remove