Crankshaft Position Sensor - Remove and Install
拆卸步骤
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 拆下螺栓 (1) 。 拆下挡板 (2) 。
Show/hide table
| 图 1 | g01242174 |
- 断开线束组件 (5) 。
Show/hide table
 | |
| 图 2 | g01242184 |
- 安装将曲轴位置传感器 (4) 固定在前壳体上的螺栓 (3) 。 拆下曲轴位置传感器 (4) 。
- 将 O 形密封圈从曲轴位置传感器 (4) 上拆下。
安装步骤
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将一个新 O 形密封圈安装在曲轴位置传感器 (4) 上。 用清洁的发动机机油润滑 O 形密封圈。
Show/hide table
| | |
| 图 3 | g01242184 |
- 将曲轴位置传感器 (4) 安装在前壳体中。 安装螺栓 (3) 。
- 连接线束组件 (5) 。
- 安装护罩 (2) 并安装螺栓 (1) 。
Show/hide table
| 图 4 | g01242174 |
Caterpillar Information System:
C15 and C18 Engines for Caterpillar Built Machines E539 High Intake Manifold Air Temperature
24M Motor Grader Machine Systems Alarm (Action)
3512C and 3516C Engines Emergency Stop Switch (Remote)
C9 Industrial Engines Reference Material
C15 and C18 Generator Set Engines Camshaft Position Sensor - Remove and Install
C15 and C18 Generator Set Engines Fuel Pressure Sensor - Remove and Install
C15 and C18 Generator Set Engines Fuel Temperature Sensor - Remove and Install
3512C and 3516C Engines Electrical Power Supply
3508C, 3512C and 3516C Marine Engines Valve Mechanism Cover Base - Remove and Install
3508C, 3512C and 3516C Marine Engines Cylinder Head - Remove
3512C and 3516C Engines Direct Fuel Control Mode
C15 and C18 Generator Set Engines Engine Temperature Sensor Open or Short Circuit - Test
3512C and 3516C Engines Engine Control Switch (ECS)
3512C and 3516C Engines Engine Speed/Timing Sensor
Electronic Injector Height Adjustment and Setting{1251, 1290} Electronic Injector Height Adjustment and Setting{1251, 1290}
3508C, 3512C and 3516C Marine Engines Accessory Drive (Front) - Remove - Engine Oil Pump and Water Pump
C15 and C18 Generator Set Engines E197 High Engine Oil Temperature
3512C and 3516C Engines Prelubrication System
3512 Industrial Engine Engine Design
C15 and C18 Generator Set Engines E085 Engine Shutdown Overridden
Procedure for Adding Filtration Capability to Solvent Stands {0680} Procedure for Adding Filtration Capability to Solvent Stands {0680}
3508C, 3512C and 3516C Marine Engines Accessory Drive (Front) - Install - Engine Oil Pump and Water Pump
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Pager Configuration
C15 and C18 Generator Set Engines Event Codes