CID 0296 FMI 09 Unable to communicate with Transmission ECM
Conditions Which Generate This Code:
The engine Electronic Control Module (ECM) loses communication with the transmission ECM.
System Response:
The engine ECM will log the diagnostic code.
- All features that depend on input from the transmission ECM will be affected.
Test Step 1. Perform the following diagnostic procedure: Cat Data Link Circuit - Test
Results:
- OK - STOP
Caterpillar Information System:
Starting and Charging Systems Starter Solenoid (Starter One) Test Description
657G Wheel Tractor-Scraper Wheel Tractor Power Train Drive Shaft - Disassemble
3508B, 3512B, and 3516B High Displacement Generator Sets Air Shutoff - Test - Engines That Are Equipped with ADEM II or ADEM III Engine Control Modules
D7G Series 2 and D7G Series II Track-Type Tractors Leaving the Machine
3176C Engines for Caterpillar Built Machines Digital Sensor Supply Circuit - Test
Installation Instructions for a 295-6544 Air Conditioner Gp (Kit) for the 950H and the 962H Wheel Loaders{7320} Installation Instructions for a 295-6544 Air Conditioner Gp (Kit) for the 950H and the 962H Wheel Loaders{7320}
D3K, D4K and D5K Track-Type Tractors Electrohydraulic System Bank Valve
3500 Industrial Engines Exhaust Flange
963C Track-Type Loader Machine Systems Air Precleaner
2006/08/07 New Fuel Line is Now Used {1274}
C175-16 Locomotive Engine Cold Mode Operation
953D Track-Type Loader Power Train Piston Pump (Hydrostatic) - Remove - Left Side
Starting and Charging Systems Start Relay (Starter Two) Test Description
Starting and Charging Systems Starter Solenoid Power Circuit (Starter Two) Test Description
3176C Engines for Caterpillar Built Machines CID 1599 FMI 05 Engine Fan Pull Solenoid open circuit
3176C Engines for Caterpillar Built Machines CID 1599 FMI 06 Engine Fan Pull Solenoid short to ground
3176C Engines for Caterpillar Built Machines CID 1600 FMI 06 Engine Fan Push Solenoid short to ground
3176C Engines for Caterpillar Built Machines CID 1600 FMI 05 Engine Fan Push Solenoid open circuit
3176C Engines for Caterpillar Built Machines CID 0545 FMI 06 Ether Start Relay short to ground
2006/07/03 A New Implement Pump Is Now Used {5073}
3176C Engines for Caterpillar Built Machines CID 0545 FMI 05 Ether Start Relay open/short to +batt
D7G Series 2 and D7G Series II Track-Type Tractors Sound Information and Vibration Information
657G Wheel Tractor-Scraper Machine Systems Relay Valve (Brake) - Remove and Install
D7G Series 2 and D7G Series II Track-Type Tractors Plate Locations and Film Locations