Drive Shaft - Disassemble
拆解步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件名称 | 数量 |
| A | 2P-8312 | 挡圈钳 | 1 |
| B | 8H-0663 | 轴承拉拔器总成 | 1 |
| C | 1P-0520 | 冲头总成 | 1 |
开始:
- 卸下驱动轴。 请参阅拆解和组装, "驱动轴 - 拆卸"。
注: 清洁度是一项重要的因素。 拆解步骤开始之前，应彻底清洁部件外部。 这将有助于防止脏污进入内部机构。
- 使用工具 (A) ，卸下挡圈 (1) 。 使用工具 (B) ，从驱动轴 (4) 上卸下轴承 (3) 。 使用工具 (A) ，卸下挡圈 (2) 。
Show/hide table
 | |
| 图 1 | g01285420 |
Show/hide table
 | |
| 图 2 | g01287029 |
- 卸下塞和定位销 (5) 。 卸下座圈 (6) 。
Show/hide table
 | |
| 图 3 | g01285572 |
- 使用工具 (A) ，卸下挡圈 (7) 。 卸下座圈 (8) 、隔套 (9) 、座圈 (10) 、隔套 (11) 和密封圈 (12) 。
Show/hide table
 | |
| 图 4 | g01285425 |
- 卸下密封 (13) 。
Show/hide table
 | |
| 图 5 | g01285427 |
- 卸下 O 形密封圈 (19) 。
Show/hide table
 | |
| 图 6 | g01287085 |
Show/hide table
 | |
| 图 7 | g01287092 |
- 卸下塞 (14) 、塞 (18) 和定位销。 使用适当的压具和工具 (C) ，从保持架 (20) 上卸下轴承 (14) 、隔套 (15) 和轴承 (16) 。 废弃塞 (17) 和 (18) 。
注: 要从保持架上作为一个整体卸下轴承 (14) 、隔套 (15) 和轴承 (16) 。
Caterpillar Information System:
3508B, 3512B, and 3516B High Displacement Generator Sets Air Shutoff - Test - Engines That Are Equipped with ADEM II or ADEM III Engine Control Modules
D7G Series 2 and D7G Series II Track-Type Tractors Leaving the Machine
3176C Engines for Caterpillar Built Machines Digital Sensor Supply Circuit - Test
Installation Instructions for a 295-6544 Air Conditioner Gp (Kit) for the 950H and the 962H Wheel Loaders{7320} Installation Instructions for a 295-6544 Air Conditioner Gp (Kit) for the 950H and the 962H Wheel Loaders{7320}
D3K, D4K and D5K Track-Type Tractors Electrohydraulic System Bank Valve
3500 Industrial Engines Exhaust Flange
963C Track-Type Loader Machine Systems Air Precleaner
2006/08/07 New Fuel Line is Now Used {1274}
C175-16 Locomotive Engine Cold Mode Operation
953D Track-Type Loader Power Train Piston Pump (Hydrostatic) - Remove - Left Side
657G Wheel Tractor-Scraper Auger Hydraulic System Oil Filter - Replace
C15 Petroleum Generator Set Engines Valve Mechanism
Starting and Charging Systems Starter Solenoid (Starter One) Test Description
3176C Engines for Caterpillar Built Machines CID 0296 FMI 09 Unable to communicate with Transmission ECM
Starting and Charging Systems Start Relay (Starter Two) Test Description
Starting and Charging Systems Starter Solenoid Power Circuit (Starter Two) Test Description
3176C Engines for Caterpillar Built Machines CID 1599 FMI 05 Engine Fan Pull Solenoid open circuit
3176C Engines for Caterpillar Built Machines CID 1599 FMI 06 Engine Fan Pull Solenoid short to ground
3176C Engines for Caterpillar Built Machines CID 1600 FMI 06 Engine Fan Push Solenoid short to ground
3176C Engines for Caterpillar Built Machines CID 1600 FMI 05 Engine Fan Push Solenoid open circuit
3176C Engines for Caterpillar Built Machines CID 0545 FMI 06 Ether Start Relay short to ground
2006/07/03 A New Implement Pump Is Now Used {5073}
3176C Engines for Caterpillar Built Machines CID 0545 FMI 05 Ether Start Relay open/short to +batt
D7G Series 2 and D7G Series II Track-Type Tractors Sound Information and Vibration Information