Governor Cable - Adjust
Show/hide table
 | |
| Illustration 1 | g00743431 |
Governor Cable Assembly | |
- Screw nut (12) onto cable assembly (11) until full thread engagement is achieved. Thread rod end (13) to cable assembly (11). Place rod end (13) against nut (12). Tighten nut (12). Use pin assembly (14) to assemble the rod end to the pedal lever (15). Align the groove in the cable with the U-bolt on the pedal assembly. Tighten the nuts on the U-bolt.
- Thread nut (5) onto the engine end of the cable assembly. Thread rod end (4) onto cable until full thread engagement is achieved. Lock with the nut (4). Align the rod end with the governor lever (8). Use bolt (1), washers (2), and locknut (3) in order to attach the cable assembly to the bracket on the engine.
- Check the high idle speeds and the low idle speeds of the engine. If it is necessary to adjust the engine idle speeds, adjust the bulkhead nuts at the governor actuator. Tighten bulkhead nuts (10) to a torque of 38 ± 7 N·m (28 ± 5 lb ft). Position stop screw (6) in order to contact the pedal at the high idle setting. Lock with the nut (7) .
Caterpillar Information System:
AD30 and AD55 Underground Articulated Trucks Power Train Electronic Control System MID 027 - CID 0590 - FMI 12
824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Power Train Torque Converter Stall - Test
320B, 322B, 325B, 330B and 345B Excavators SmartBoom Operation - If Equipped
Caterpillar Monitoring System Display Module (Lamp and Gear)
D5N Track-Type Tractor Window Washer Reservoir - Fill
AD30 and AD55 Underground Articulated Trucks Power Train Electronic Control System MID 027 - CID 0590 - FMI 09
D5N Track-Type Tractor Transmission Oil Level - Check
D5N Track-Type Tractor Transmission Magnetic Screen - Clean
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Crankshaft Pulley
AD30 and AD55 Underground Articulated Trucks Power Train Electronic Control System MID 027 - CID 0585 - FMI 08
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Injection Lines
D5N Track-Type Tractor Track Roller Frame - Inspect
D5N Track-Type Tractor Window Wipers - Inspect/Replace
G3304 and G3306 Engines Engine Oil Pressure is High
G3304 and G3306 Engines Engine Oil Pressure is Low
AD30 and AD55 Underground Articulated Trucks Power Train Electronic Control System MID 027 - CID 0627 - FMI 03
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Steering Frame Lock
621G and 627G Wheel Tractor-Scrapers Hydraulic System Pressure Reducing Valve (Pilot, Implement) - Test and Adjust
623G Wheel Tractor-Scraper Hydraulic System Pressure Reducing Valve (Pilot, Implement) - Test and Adjust
G3304 and G3306 Engines General Information (Lubrication System)
G3304 and G3306 Engines General Information (Cooling System)
Water Valve Assembly and Board Control Assembly Installation{7320} Water Valve Assembly and Board Control Assembly Installation{7320}
950F Series II Wheel Loader Power Train Torque Converter Stall - Test
D9R Track-Type Tractor Final Drive Oil Sample - Obtain