The Spring Used To Tighten The Fan Belt Needs To Be Replaced On Certain D9N Tractors Caterpillar


The Spring Used To Tighten The Fan Belt Needs To Be Replaced On Certain D9N Tractors

Usage:

@media screen { div.divFooter { display: none; } } @media print { div.divFooter { position: fixed; bottom: 0; right: 0; } }
Caterpillar: Confidential Yellow

NOTE: The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.

NOTE: This Program must be administered as soon as possible. When reporting the repair, use "PI3593P" as the Part Number, "7751" as the Group Number, "56" as the Warranty Claim Description Code and "T" as the SIMS Description Code. Exception: If the repair is done after failure, use "PI3593" as the Part Number, "7751" as the Group Number, "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code.

Completion Date

January 31, 1993

Termination Date

July 31, 1993

Problem

The existing 6I0761 Spring used to tighten the fan belt needs to be replaced on certain D9N Tractors.

Affected Product
Model & Identification Number

D9N (1JD2294, 1JD2770, 1JD2773, 1JD3256-3300, 1JD3303-3307)

Parts Needed

Dealers will need to order parts for this Program.

1 - 6I0761 Spring

Action Required

Parts Stock

Remove all 6I0761 Springs from parts stock that were shipped before June 1, 1992.

Affected Product

Replace the existing 6I0761 Spring with a new 6I0761 Spring (same part number). The new spring has a heavier gauge wire.

Owner Notification

U.S. and Canadian owners will receive the attached Owner Notification.

Service Claim Allowances

Parts Stock

Submit one claim for all 6I0761 Springs removed from parts stock.

Affected Product

NOTE: This is a 1-hour job.

NOTE: U.S. and Canadian Dealers Only - Eligible dealers may enter a Type 2 SIMS Report.

Parts Disposition

U.S. and Canadian Dealers

Return all 6I0761 Springs that are removed from parts stock and a copy of the claim to:

Caterpillar Inc.
Attn: Supplier Recovery Supervisor
Warehouse #4 Docks 7 thru 10
8201 N. University
Peoria, IL 61615

All Other Dealers

Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.

NOTE: MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.

Attach. (1-Owner Notification)

Copy Of Owner Notification For U.S. And Canadian Owners

Caterpillar Information System:

Product Support Program For Replacing The Clutch Brake Lining On Certain D4E DD, D4E SR, D4E SA, D5B DD, D6D DD, D6D SA, And D6D SR Tractors Product Support Program For Replacing The Clutch Brake Lining On Certain D4E DD, D4E SR, D4E SA, D5B DD, D6D DD, D6D SA, And D6D SR Tractors
Product Support Program For Replacing The Pivot Shaft Bolts On Certain 953 Loaders Product Support Program For Replacing The Pivot Shaft Bolts On Certain 953 Loaders
Product Support Program For Replacing The Rear Yoke Of The Driveshaft On Certain 950F Loaders Product Support Program For Replacing The Rear Yoke Of The Driveshaft On Certain 950F Loaders
Shipments of 1P1608 Gears Shipped Prior To January Of 1992 Need To Be Removed From Parts Stock Shipments of 1P1608 Gears Shipped Prior To January Of 1992 Need To Be Removed From Parts Stock
SAFETY - THE WHEEL RIM NUTS NEED TO BE TIGHTENED ON CERTAIN IT18 AND IT28 TOOLCARRIERS; AND ON CERTAIN 926 AND 916 LOADERS - P I1202 - MAILED US AND CANADA, CACO SAFETY - THE WHEEL RIM NUTS NEED TO BE TIGHTENED ON CERTAIN IT18 AND IT28 TOOLCARRIERS; AND ON CERTAIN 926 AND 916 LOADERS - P I1202 - MAILED US AND CANADA, CACO
The Pistons And Rods For The Lift Cylinders Need To Be Reworked On Certain 994 Wheel Loaders To Accommodate A Larger Bolts The Pistons And Rods For The Lift Cylinders Need To Be Reworked On Certain 994 Wheel Loaders To Accommodate A Larger Bolts
Product Support Program For Repairing Cracks Between Fuel Tank And Rear Frame Member On Certain 623E Scrapers Product Support Program For Repairing Cracks Between Fuel Tank And Rear Frame Member On Certain 623E Scrapers
3S2708 Spring Pins Need To Be Removed From Parts Stock 3S2708 Spring Pins Need To Be Removed From Parts Stock
New Hood Rear Mounts Need To Be Installed On Certain D5C Tractors New Hood Rear Mounts Need To Be Installed On Certain D5C Tractors
Product Support Program For Increasing The Brake Modulation On Certain 950F Wheel Loaders Product Support Program For Increasing The Brake Modulation On Certain 950F Wheel Loaders
Remanufactured Cylinder Heads Need To Be Removed From Parts Stock And Returned For Rework Remanufactured Cylinder Heads Need To Be Removed From Parts Stock And Returned For Rework
Product Support Program For Installing New Fuel Injection Line Groups On Certain D10N Tractors; 651E And 657E Tractors; 772B Tractors; 773B Trucks; And 992C Loaders Product Support Program For Installing New Fuel Injection Line Groups On Certain D10N Tractors; 651E And 657E Tractors; 772B Tractors; 773B Trucks; And 992C Loaders
The Rear Track Roller Frame Needs To Be Reinforced On Certain D4H Tractors The Rear Track Roller Frame Needs To Be Reinforced On Certain D4H Tractors
Certain Batches Of Cat Engine Oil Need To Be Removed From Stock Certain Batches Of Cat Engine Oil Need To Be Removed From Stock
Product Support Program For Replacing The Fan Spider Assembly On Certain D3C Tractors, D4C Tractors, 931C Track Loaders, And 935C Track Loaders Product Support Program For Replacing The Fan Spider Assembly On Certain D3C Tractors, D4C Tractors, 931C Track Loaders, And 935C Track Loaders
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Product Support Program For Replacing The Engine Oil Level Guage On Certain D11N Tractors Product Support Program For Replacing The Engine Oil Level Guage On Certain D11N Tractors
Product Support Program For Replacing The Exhaust Manifold And Muffler On Certain 930R And 930T Wheel Loaders Product Support Program For Replacing The Exhaust Manifold And Muffler On Certain 930R And 930T Wheel Loaders
Product Support Program For Repairing The Ripper Control Valve On Certain D11N Tractors Product Support Program For Repairing The Ripper Control Valve On Certain D11N Tractors
Product Support Program For Replacing The 9Y3222 Injector Rocker Arms On Certain 205B, 206B, 211B, 212B, 213B, 214B, 224B, And 325 Excavators; D20D And D250D Articulated Trucks; 446 Backhoe Loaders; 950F Loaders; 3114 Industrial Engines; 3116 Truck E Product Support Program For Replacing The 9Y3222 Injector Rocker Arms On Certain 205B, 206B, 211B, 212B, 213B, 214B, 224B, And 325 Excavators; D20D And D250D Articulated Trucks; 446 Backhoe Loaders; 950F Loaders; 3114 Industrial Engines; 3116 Truck E
Product Support Program For Replacing The Fuel Injection Nozzles In Certain D3C, D4C, D4H, D5C, And D5C LGP Tractors; D4H Track Skidders; 931C, 935C, 943, And 953 Loaders; 916 And 926E Loaders; And IT18B And IT28B Tool Carriers Product Support Program For Replacing The Fuel Injection Nozzles In Certain D3C, D4C, D4H, D5C, And D5C LGP Tractors; D4H Track Skidders; 931C, 935C, 943, And 953 Loaders; 916 And 926E Loaders; And IT18B And IT28B Tool Carriers
Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactor Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactor
The Power Angle Tilt Bulldozer Blade On Certain D5C And D5C LGP Tractors Needs To Be Reworked The Power Angle Tilt Bulldozer Blade On Certain D5C And D5C LGP Tractors Needs To Be Reworked
Product Support Program For Replacing The 9T6268 Tilt Cylinder Assembly (Logging) On Certain 966E And 966F Wheel Leaders Product Support Program For Replacing The 9T6268 Tilt Cylinder Assembly (Logging) On Certain 966E And 966F Wheel Leaders
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.