Product Support Program For Replacing The Clutch Brake Lining On Certain D4E DD, D4E SR, D4E SA, D5B DD, D6D DD, D6D SA, And D6D SR Tractors Caterpillar


Product Support Program For Replacing The Clutch Brake Lining On Certain D4E DD, D4E SR, D4E SA, D5B DD, D6D DD, D6D SA, And D6D SR Tractors

Usage:

@media screen { div.divFooter { display: none; } } @media print { div.divFooter { position: fixed; bottom: 0; right: 0; } }
Caterpillar: Confidential Yellow

NOTE: The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.

NOTE: This Program can be administered either before or after a failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS4812" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and use "T" as the SIMS Description Code. If administered after failure, use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code.

Termination Date

JULY 31, 1993

Problem

The clutch brake lining on certain D4E DD, D4E SR, D4E SA, D5B DD, D6D DD, D6D SA, and D6D SR Tractors can result in excessive drum wear and eventually result in little or no braking action for the flywheel clutch.

Affected Product
Model & Identification Number

D4E (34C1-1424, 34C1426-1429, 34C1431-1435, 34C1437; 76W1-2652, 76W2657-2664, 76W2666, 76W2667; 2DJ1-186, 2DJ188-250, 2DJ252-260, 2DJ262-264, 2DJ267-272, 2DJ274, 2DJ275, 2DJ277-282, 2DJ285-290; 2CB1-530; 7PB1-714)

D5B (5LD1-242, 5LD244-424, 5LD426-439, 5LD441, 5LD446, 5LD447)

D6D (37C1-1424, 37C1426-1429, 37C1431-1435, 37C1437; 74W1-1522, 74W1524, 74W1528-1538, 74W1542-1555; 7XF1-106, 7XF112-116, 7XF118-120, 7XF122-130, 7XF132-158, 7XF160-204, 7XF206-209, 7XF210, 7XF212, 7XF213; 38C1-374, 38C376-459, 38C461-463, 38C466; 19B1-835, 19B837-848, 19B850, 19B851)

Parts Needed

4 - 6B4284 Rivet
1 - 8E5820 Lining

Action Required

Remove the 9W0472 Shoe Assembly from the flywheel clutch group. Remove the existing 6Y2197 Lining from the 9W0472 Shoe Assembly and replace it with a new 8E5828 Lining.

Check the flywheel clutch brake for proper adjustment at least every 500 Hours or 3 Months.

Service Claim Allowances

NOTE: This is a 1-hour job.

Parts Disposition

Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.

Caterpillar Information System:

Product Support Program For Replacing The Pivot Shaft Bolts On Certain 953 Loaders Product Support Program For Replacing The Pivot Shaft Bolts On Certain 953 Loaders
Product Support Program For Replacing The Rear Yoke Of The Driveshaft On Certain 950F Loaders Product Support Program For Replacing The Rear Yoke Of The Driveshaft On Certain 950F Loaders
Shipments of 1P1608 Gears Shipped Prior To January Of 1992 Need To Be Removed From Parts Stock Shipments of 1P1608 Gears Shipped Prior To January Of 1992 Need To Be Removed From Parts Stock
SAFETY - THE WHEEL RIM NUTS NEED TO BE TIGHTENED ON CERTAIN IT18 AND IT28 TOOLCARRIERS; AND ON CERTAIN 926 AND 916 LOADERS - P I1202 - MAILED US AND CANADA, CACO SAFETY - THE WHEEL RIM NUTS NEED TO BE TIGHTENED ON CERTAIN IT18 AND IT28 TOOLCARRIERS; AND ON CERTAIN 926 AND 916 LOADERS - P I1202 - MAILED US AND CANADA, CACO
The Pistons And Rods For The Lift Cylinders Need To Be Reworked On Certain 994 Wheel Loaders To Accommodate A Larger Bolts The Pistons And Rods For The Lift Cylinders Need To Be Reworked On Certain 994 Wheel Loaders To Accommodate A Larger Bolts
Product Support Program For Repairing Cracks Between Fuel Tank And Rear Frame Member On Certain 623E Scrapers Product Support Program For Repairing Cracks Between Fuel Tank And Rear Frame Member On Certain 623E Scrapers
3S2708 Spring Pins Need To Be Removed From Parts Stock 3S2708 Spring Pins Need To Be Removed From Parts Stock
New Hood Rear Mounts Need To Be Installed On Certain D5C Tractors New Hood Rear Mounts Need To Be Installed On Certain D5C Tractors
Product Support Program For Increasing The Brake Modulation On Certain 950F Wheel Loaders Product Support Program For Increasing The Brake Modulation On Certain 950F Wheel Loaders
Remanufactured Cylinder Heads Need To Be Removed From Parts Stock And Returned For Rework Remanufactured Cylinder Heads Need To Be Removed From Parts Stock And Returned For Rework
Product Support Program For Installing New Fuel Injection Line Groups On Certain D10N Tractors; 651E And 657E Tractors; 772B Tractors; 773B Trucks; And 992C Loaders Product Support Program For Installing New Fuel Injection Line Groups On Certain D10N Tractors; 651E And 657E Tractors; 772B Tractors; 773B Trucks; And 992C Loaders
Product Support Program For Installing New Fuel Injection Line Groups On Certain D10N Tractors; 651E And 657E Tractors; 772B Tractors; 773B Trucks; And 992C Loaders Product Support Program For Installing New Fuel Injection Line Groups On Certain D10N Tractors; 651E And 657E Tractors; 772B Tractors; 773B Trucks; And 992C Loaders
The Spring Used To Tighten The Fan Belt Needs To Be Replaced On Certain D9N Tractors The Spring Used To Tighten The Fan Belt Needs To Be Replaced On Certain D9N Tractors
The Rear Track Roller Frame Needs To Be Reinforced On Certain D4H Tractors The Rear Track Roller Frame Needs To Be Reinforced On Certain D4H Tractors
Certain Batches Of Cat Engine Oil Need To Be Removed From Stock Certain Batches Of Cat Engine Oil Need To Be Removed From Stock
Product Support Program For Replacing The Fan Spider Assembly On Certain D3C Tractors, D4C Tractors, 931C Track Loaders, And 935C Track Loaders Product Support Program For Replacing The Fan Spider Assembly On Certain D3C Tractors, D4C Tractors, 931C Track Loaders, And 935C Track Loaders
Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock Certain 8N6862, 8N6863, 7E2867, And 7E2868 Water Seals Need To Be Removed From Parts Stock
Product Support Program For Replacing The Engine Oil Level Guage On Certain D11N Tractors Product Support Program For Replacing The Engine Oil Level Guage On Certain D11N Tractors
Product Support Program For Replacing The Exhaust Manifold And Muffler On Certain 930R And 930T Wheel Loaders Product Support Program For Replacing The Exhaust Manifold And Muffler On Certain 930R And 930T Wheel Loaders
Product Support Program For Repairing The Ripper Control Valve On Certain D11N Tractors Product Support Program For Repairing The Ripper Control Valve On Certain D11N Tractors
Product Support Program For Replacing The 9Y3222 Injector Rocker Arms On Certain 205B, 206B, 211B, 212B, 213B, 214B, 224B, And 325 Excavators; D20D And D250D Articulated Trucks; 446 Backhoe Loaders; 950F Loaders; 3114 Industrial Engines; 3116 Truck E Product Support Program For Replacing The 9Y3222 Injector Rocker Arms On Certain 205B, 206B, 211B, 212B, 213B, 214B, 224B, And 325 Excavators; D20D And D250D Articulated Trucks; 446 Backhoe Loaders; 950F Loaders; 3114 Industrial Engines; 3116 Truck E
Product Support Program For Replacing The Fuel Injection Nozzles In Certain D3C, D4C, D4H, D5C, And D5C LGP Tractors; D4H Track Skidders; 931C, 935C, 943, And 953 Loaders; 916 And 926E Loaders; And IT18B And IT28B Tool Carriers Product Support Program For Replacing The Fuel Injection Nozzles In Certain D3C, D4C, D4H, D5C, And D5C LGP Tractors; D4H Track Skidders; 931C, 935C, 943, And 953 Loaders; 916 And 926E Loaders; And IT18B And IT28B Tool Carriers
Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactor Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactor
The Power Angle Tilt Bulldozer Blade On Certain D5C And D5C LGP Tractors Needs To Be Reworked The Power Angle Tilt Bulldozer Blade On Certain D5C And D5C LGP Tractors Needs To Be Reworked
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.