Wheel Tractor-Scraper
Show/hide table
Illustration 1 | g02896938 |
The CE plate is located on the PIN Plate (1) when required.
PIN Plate (1) for the scraper is located on the left side of the scraper bowl.
PIN Plate (1) for the tractor is located on the left side of the tractor frame. The plate is below the operator compartment.
The Service Information Number (SIN) (2) is located on the door for the fuse panel.
Serial Number for the engine (3) is found on top of the front valve cover.
Caterpillar Information System:
Product Identification Numbers (PIN) Location Guide Track-Type Skidder
Product Identification Numbers (PIN) Location Guide Motor Grader
3500B and 3500B High Displacement Generator Set Engines System Overview
3412C Engine Aftercooler - Remove and Install
3606, 3608, 3612 and 3616 Engines and C280-12, C280-16, C280-6 and C280-8 Marine Engines Control Panel Detectors
3412C Engine Vibration Damper and Pulley - Remove and Install
Product Identification Numbers (PIN) Location Guide Pipelayer
2001/05/01 Be Sure To Tighten The Locknut For The Adjusting Screw For The Fuel Injector Rocker Arm To The Correct Torque {1290}
SPS342 Skid Mounted Pumper Reference Material
G3600 Engines Safety Messages
3412C Engine Flywheel Housing - Remove and Install
SPS342 Skid Mounted Pumper Connecting Rod Bearings - Inspect/Replace
XQ300, XQ400 Rental Generator Sets Cold Weather Starting
Electronic Modular Control Panel II+ (EMCP II+) General Information
Product Identification Numbers (PIN) Location Guide Bucket
3412C Engine Engine Oil Pan - Remove and Install
2001/05/01 A New Special Instruction, REHS1026-00, "Installation And Callibration Of The 144-0441 Tachometer " Is Available {7462, 7462}
XQ300, XQ400 Rental Generator Sets Control Panel
3412C Engine Inlet and Exhaust Valves - Remove and Install
3606, 3608, 3612 and 3616 Engines and C280-12, C280-16, C280-6 and C280-8 Marine Engines Control Panel Solenoids
Electronic Modular Control Panel II+ (EMCP II+) Data Link
Product Identification Numbers (PIN) Location Guide Bulldozer
Product Identification Numbers (PIN) Location Guide Ripper
Air Conditioning and Heating R134a for All Caterpillar Machines Electronic Heat Control - Test