Soot Antenna - Remove and Install
Removal Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | - | Isopropyl Alcohol | - |
- Turn disconnect switch (1) to the OFF position.
Show/hide table
 | |
| Illustration 1 | g02742999 |
- Open door (2) .
Show/hide table
 | |
| Illustration 2 | g02775016 |
- Disconnect both ends of harness assembly (3). Remove soot antenna (4) .
Show/hide table
 | |
| Illustration 3 | g02775036 |
Installation Procedure
- Install soot antenna (3) in the reverse order of removal.
- Apply Tooling (A) to soot antenna (3). Install soot antenna (3) and tighten to a torque of 45 ± 5 N·m (33 ± 4 lb ft).
- Hand tighten the ends of harness assembly (3) .
Note: Do not over tighten the ends of harness assembly (3) .
Caterpillar Information System:
318E Excavator C4.4 Engine Supplement Diesel Particulate Filter - Remove and Install
318E Excavator C4.4 Engine Supplement Fuel Manifold - Remove and Install
336F and 340F Excavators Machine System Boom System
336E Excavator Machine System Specifications Pilot Lines
336E Excavator Machine System Specifications Pilot Lines
336E Excavator Machine System Specifications Pilot Lines
336E Excavator Machine System Specifications Pilot Lines
336E Excavator Machine System Specifications Front Lines
Installation of the Generator and Control Panel Components for Dynamic Gas Blending Retrofits on Certain 3500 Engines{4490, 7451} Installation of the Generator and Control Panel Components for Dynamic Gas Blending Retrofits on Certain 3500 Engines{4490, 7451}
312F, 313F, 316F and 318F Excavators Wiring Harness (Short Circuit) - Test
336E Excavator Machine System Specifications Pilot Lines
Procedure to Install the 380-3967 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547} Procedure to Install the 380-3967 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
318E Excavator C4.4 Engine Supplement Soot Sensor - Remove and Install
318E Excavator C4.4 Engine Supplement Temperature Sensor (DPF) - Remove and Install
336E Excavator Machine System Specifications Front Lines
336E Excavator Machine System Specifications Front Lines
Flywheel Housing Salvage for Excavator C18 Engines {0677, 1157} Flywheel Housing Salvage for Excavator C18 Engines {0677, 1157}
318E Excavator C4.4 Engine Supplement Pressure Sensor (DPF) - Remove and Install - Clean Emissions Module
318E Excavator C4.4 Engine Supplement Exhaust Elbow - Remove and Install
318E Excavator C4.4 Engine Supplement Clean Emissions Module - Remove and Install
318E Excavator C4.4 Engine Supplement Hood - Remove and Install
318E Excavator C4.4 Engine Supplement Engine Front Mount - Remove and Install
336E H Excavator Connector Contact Description
312D2 and 313D2 Excavators Hydraulic System Oil Filter (Return) - Replace