Transport Position
Show/hide table
NOTICE |
---|
For specific information on your host machine, refer to the Operation and Maintenance Manual of your host machine. |
Show/hide table
Illustration 1 | g02993143 |
When you transport the thumb on the host machine, extend the bucket cylinder in order to position the bucket against the thumb. Position the stick under the boom in order to carry the boom at a lower position.
Caterpillar Information System:
314E CR and 314E SR Excavator Systems Electronic Control Module
314E CR and 314E SR Excavator Systems Boom System
Hydraulic Thumbs Plate Locations and Film Locations
Hydraulic Thumbs Safety Messages
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201} Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
314E CR and 314E SR Excavator Systems Negative Flow Control System
2012/04/12 New Engine Software Is Used on Certain Excavators {1901, 1902, 1920, 7620}
314E CR and 314E SR Excavator Systems Main Control Valve
Hydraulic Thumbs Approved Machines
329F and 330F Excavators Machine System Specifications Stick Cylinder Lines
314E CR and 314E SR Excavator Systems Pilot System
307D Excavator Hydraulic System Pump Control (Main Hydraulic)
826K Landfill Compactor Alternate Exit
Hydraulic Thumbs Shipping
Hydraulic Thumbs Lifting and Tying Down
Hydraulic Thumbs Thumb - Lubricate
C13, C15, and C18 Tier 4 Final Engines Mounting Frame
314E CR and 314E SR Excavator Systems Stick System
C2.6 and C3.3B Engines for Caterpillar Built Machines Water Temperature Regulator
C2.6 and C3.3B Engines for Caterpillar Built Machines Cylinder Head
314E CR and 314E SR Excavator Systems Bucket System
C2.6 and C3.3B Engines for Caterpillar Built Machines Engine Oil Cooler
C2.6 and C3.3B Engines for Caterpillar Built Machines Fan Drive
320E and 323E Excavators Machine System Specifications Pilot Lines