Plate Locations and Film Locations
Cat work tools are identified with serial numbers.
The serial number plate (1) is located on the inner side of the Hyd Hex Thumb.
Show/hide table
| |
| Illustration 1 | g02992904 |
| (1) Serial number plate location | |
Show/hide table
| |
| Illustration 2 | g01474613 |
| (1) Serial number plate | |
For quick reference, record the identification numbers in the spaces that are provided below.
Serial Number of the Work Tool____________________
Model____________________
Year of Manufacture____________________
Approximate Weight____________________
Caterpillar Information System:
Hydraulic Thumbs Safety Messages
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201} Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
314E CR and 314E SR Excavator Systems Negative Flow Control System
2012/04/12 New Engine Software Is Used on Certain Excavators {1901, 1902, 1920, 7620}
314E CR and 314E SR Excavator Systems Main Control Valve
Hydraulic Thumbs Approved Machines
329F and 330F Excavators Machine System Specifications Stick Cylinder Lines
314E CR and 314E SR Excavator Systems Pilot System
307D Excavator Hydraulic System Pump Control (Main Hydraulic)
C13, C15, and C18 Tier 4 Final Engines Diesel Particulate Filter
336E H Excavator Hydraulic System Stick System
321D LCR Excavator Machine System Specifications Pilot Lines
314E CR and 314E SR Excavator Systems Boom System
314E CR and 314E SR Excavator Systems Electronic Control Module
Hydraulic Thumbs Transport Position
826K Landfill Compactor Alternate Exit
Hydraulic Thumbs Shipping
Hydraulic Thumbs Lifting and Tying Down
Hydraulic Thumbs Thumb - Lubricate
C13, C15, and C18 Tier 4 Final Engines Mounting Frame
314E CR and 314E SR Excavator Systems Stick System
C2.6 and C3.3B Engines for Caterpillar Built Machines Water Temperature Regulator
C2.6 and C3.3B Engines for Caterpillar Built Machines Cylinder Head
314E CR and 314E SR Excavator Systems Bucket System