Specifications
Show/hide table
| 技术规格 | PC104B | PC205B |
| 铣刨宽度 | 350 mm (13.75 in) |
450 mm (17.7") |
| 最大铣刨深度 | 150 mm (5.9 in) |
150 mm (5.9 in) |
| 侧移行程 | 650 mm (25.6 in) |
650 mm (25.6 in) |
| 倾斜角度范围 | +/- 8.5° | +/- 8.5° |
| 配重 | 670 kg (1474 lb) |
730 kg (1610 lb) |
| 最佳液压流量 | 60 L/min (16 US gpm) 至 80 L/min (21 US-Gall/min) |
80 L/min (21 US-Gall/min) 至 115 L/min (30 US gpm) |
| 最佳液压压力 | 230 bar (3380 psi) |
230 bar (3380 psi) |
预期用途
Caterpillar 冷铣刨机专用于住宅社区和商业场所的小规模铺路作业。 冷铣刨机在重新铺设路面前在宽幅路面上铣削鼓包和缺陷，除去裂开或老化的路面，除去车道线以及在重量限制使用专用铣刨机的场合，都是理想之选。
Caterpillar Information System:
308E2 CR and 308E2 SR Mini Hydraulic Excavators Final Drive Oil - Change
336E H Excavator Hydraulic System Relief Valve (Swing)
307E2 Mini Hydraulic Excavator Engine Oil Sample - Obtain
Procedure to Install Pro and Pro Plus Thumbs on 311D, 312D, 312E, 313D, 314D, 314E, 315D, 316E, 318E Hydraulic Excavators {0679, 6547} Procedure to Install Pro and Pro Plus Thumbs on 311D, 312D, 312E, 313D, 314D, 314E, 315D, 316E, 318E Hydraulic Excavators {0679, 6547}
336F XE Excavator Machine System Pilot Valve (Swing Parking Brake)
307E2 Mini Hydraulic Excavator Engine Oil Level - Check
303E CR, 303.5E, 304E, 305.5E and 305E Mini Hydraulic Excavators Machine Systems Main Control Valve - Install
308E2 CR and 308E2 SR Mini Hydraulic Excavators Engine Air Filter Element - Clean/Replace
307E2 Mini Hydraulic Excavator Engine Air Filter Secondary Element - Replace
308E CR Mini Hydraulic Excavator Hydraulic System Main Pump (Flow) - Test
PC104B and PC205B Cold Planers Safety Messages
Installation Procedure of the 371-1699 Hydraulic Kit (Center Lock) for Certain 321D LCR Excavators{6129} Installation Procedure of the 371-1699 Hydraulic Kit (Center Lock) for Certain 321D LCR Excavators{6129}
3500B Engines for Caterpillar Built Power Modules Vibration Damper
C15 and C18 Engines for Caterpillar Built Machines Fuel Transfer Pump
C15 and C18 Engines for Caterpillar Built Machines Air Cleaner
2012/02/17 An Improved Manufacturing Process Increases the Service Life of the Springshaft on Certain CW-20/30/40 Quick Couplers {6129}
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Emissions Warranty Information
PC104B and PC205B Cold Planers Caterpillar Approved Machines
312E, 316E and 318E Excavators Window Wiper Delay - Test
308E2 CR and 308E2 SR Mini Hydraulic Excavators Final Drive Oil Level - Check
308E2 CR and 308E2 SR Mini Hydraulic Excavators Final Drive Oil Sample - Obtain
308E2 CR Mini Hydraulic Excavator Fuel Tank Water and Sediment - Drain
308E CR Mini Hydraulic Excavator Fuses - Replace
PC104B and PC205B Cold Planers Plate Locations and Film Locations