C13, C15, and C18 Tier 4 Final Engines Caterpillar


Turbocharger

Usage:

826K 232


图 1g02605977


图 2g02605976

表 1
262-2943 涡轮增压器总成技术规格 
项目  数量  零件  技术规格说明 
9N-2038 涡轮卡箍组件  按照以下步骤拧紧涡轮卡箍组件:
1. 拧紧至扭矩为 18.1 N·m (160.2 lb in)
2. 松开 1 到 2 圈。
3. 再次拧紧至扭矩为 13.6 ± 1.2 N·m (120.4 ± 10.6 lb in)。 
废气旁通阀的打开压力是 142.0 ± 3.5 kPa20 (.6 ± 0.5 psi)。 
7W-2297 卡箍组件  拧紧至扭矩为 13.5 ± 1.0 N·m (119.5 ± 9.0 lb in)。 
375-2467 法兰锁紧螺母  组装前,将 Loctite C5A 铜防咬合剂涂抹到螺纹上。 
拧紧至扭矩为 70 ± 5 N·m (52 ± 4 lb ft)

Caterpillar Information System:

C3.4B Engines for Caterpillar Built Machines Compression - Test
349E Excavator Machine System Specifications Auxiliary Hydraulic Lines - Coupler Lines
349E Excavator Machine System Specifications Auxiliary Hydraulic Lines - Coupler Lines
349E Excavator Machine System Specifications Quick Coupler (Spindle)
C13, C15, and C18 Tier 4 Final Engines Flywheel
C15 and C18 Engines for Caterpillar Built Machines Engine Trunnion
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Fuel Tank
330D and 336D Excavators Machine System Specifications Fuel Lines
300.9D VPS Mini Hydraulic Excavator Machine Systems Hydraulic System Troubleshooting
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Control Valve - Assemble
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Control Valve - Disassemble
301.4C Mini Hydraulic Excavator Relief Valve - Test and Adjust - Pilot
C13, C15, and C18 Tier 4 Final Engines Turbocharger
VRG-20/2, VRG-25/2 and VRG-30/2 Demolition and Sorting Grapples Hydraulic Rotator Cycle Time - Check
C13, C15, and C18 Tier 4 Final Engines Turbocharger
330D and 336D Excavators and 330D Material Handlers Machine System Specifications Pilot Lines - Travel
320E RR Excavator Hydraulic System Pump Control (Negative Flow) - Test
301.4C Mini Hydraulic Excavator Relief Valve (Main) - Test and Adjust
Installation Procedure for the Anti Drift Valve for the Blade on 307D and 308D CR Excavators {5051} Installation Procedure for the Anti Drift Valve for the Blade on 307D and 308D CR Excavators {5051}
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Hydraulic Hammer - Disassemble
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Hydraulic Hammer - Assemble
320E and 323E Excavators Hydraulic System Automatic Travel Speed Control - Test
330D and 336D Excavators Machine System Specifications Main Control Valve
349F and 352F Excavators Machine System Specifications Solenoid Valve (System 16, 1-Way, 2-Pump)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.