3003, 3013, 3014 and 3024 Industrial Engines Caterpillar

Standard Torque for Metric Fasteners

Usage:

3003 3ZG

Show/hide table

Table 1
Metric Nuts and Bolts
Thread Size Metric	Bolt Strength	Coarse Thread	Fine Thread
Thread Size Metric	Bolt Strength	Torque	Torque
M4	8.8	3 N·m (27 lb in)
M4	11T	4 N·m (35 lb in)
M5	8.8	6 N·m (53 lb in)
M5	11T	8 N·m (71 lb in)
M6	8.8	10 N·m (89 lb in)
M6	11T	14 N·m (10 lb ft)
M8	8.8	26 N·m (19 lb ft)	30 N·m (22 lb ft)
M8	11T	32 N·m (24 lb ft)	35 N·m (26 lb ft)
M10	8.8	50 N·m (37 lb ft)	56 N·m (41 lb ft)
M10	11T	62 N·m (46 lb ft)	66 N·m (49 lb ft)
M12	8.8	75 N·m (55 lb ft)	84 N·m (62 lb ft)
M12	11T	104 N·m (77 lb ft)	113 N·m (83 lb ft)
M14	8.8	118 N·m (87 lb ft)	132 N·m (97 lb ft)
M14	11T	157 N·m (116 lb ft)	167 N·m (123 lb ft)
M16	8.8	167 N·m (123 lb ft)	175 N·m (129 lb ft)
M16	11T	230 N·m (170 lb ft)	245 N·m (181 lb ft)

Caterpillar Information System:

3054 and 3056 Marine Generator Sets Sensors and Electrical Components

725 and 730 Articulated Trucks Power Train Transmission Mounting

3114, 3116, and 3126 Engines for Caterpillar Built Machines Front Cover - Install

3054, 3054B and 3056 Marine Engines Turbocharger - Install

2006/07/03 New Exhaust Temperature Sensor Groups (Thermocouples) are Available {1919, 7498}

3054, 3054B and 3056 Marine Engines Water Temperature Regulator - Remove and Install - 3056 Engine

3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Install - 3013, 3014 and 3024 Engines

3608 Engine Turbocharger Mounting

Marine Monitoring System II Service Tools

Marine Monitoring System II Reference Material

3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Injection Nozzles - Remove - 3013, 3014 and 3024 Engines

3618 Engine Fuel Injector - Install

3054, 3054B and 3056 Marine Engines Cylinder Head - Install - 3056 Engine

C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Overhaul Considerations

G3304 and G3306 Engines Finding the Top Center Position for the No. 1 Piston

3054, 3054B and 3056 Marine Engines Inlet and Exhaust Manifold - Install - 3056 Engine

2001/01/01 A New Valve Stem Seal Is Used In The Cylinder Head Groups For All Landfill Applications: New Valve Guides Are Used In All Cylinder Head Groups: Reference Tables Identify Cylinder Head Components For G3500 Series Engines {1104}

365B, 365B Series II and 365BL Excavators SmartBoom Control - If Equipped

G3304 and G3306 Engines Carburetor - Adjust

3054 and 3056 Marine Generator Set Engines V-Belts - Remove and Install

3054 and 3056 Marine Generator Set Engines Coolant Temperature Switch - Remove and Install

3054 and 3056 Marine Generator Set Engines Engine Oil Pressure Switch - Remove and Install

3608 Engine Air Starting System Operation

Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Compressor Protection System