Engine Oil Pressure Sensor - Remove and Install
拆卸步骤
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
注意 |
---|
机器做检查、保养、测试、调整和修理时,必须小心,不让油液流出。 在打开任何舱室或解体任何储有液体的零件之前,要准备好合适的容器收集流出液体。 有关可提供予卡特彼勒机器的工具及适合于盛装油液的容器,请参阅专门出版物, NENG2500, "卡特彼勒工具及车间用品指南"。 按照本地法规和指令处置所有液体。 |
- 在发动机机油压力传感器的导线上作出识别标记。 断开发动机机油压力传感器的导线 (2) 。
Show/hide table
图 1 | g00493628 |
典型示例 |
- 从缸体上拆下发动机机油压力传感器 (1) 。
安装步骤
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将发动机机油压力传感器 (1) 安装到缸体上。
Show/hide table
图 2 | g00493628 |
典型示例 |
- 连接发动机机油压力传感器的导线 (2) 。
Caterpillar Information System:
C-10 and C-12 Industrial Engines Fuel Temperature Sensor
3408E and 3412E Engines for Caterpillar Built Machines Inlet Air Temperature Sensor
3306B Industrial Engine Electrical System
3306B Industrial Engine Model View Illustrations
G3612 and G3616 Engines Engine Supervisory System
3306B Industrial Engine Safety Signs and Labels
3306B Industrial Engine Air Inlet and Exhaust System
3406C (PEEC III) Truck Engine Turbocharger
Electronic Modular Control Panel II (EMCP II) For MUI Engines Connector Contact Identification of Generator Set Control
Installation of 7C-6208 Cylinder Sleeve {1222} Installation of 7C-6208 Cylinder Sleeve {1222}
3406E Truck Engine BrakeSaver Engine Oil Filter Base
3406E Truck Engines Cylinder Liner
3408E and 3412E Engines for Caterpillar Built Machines Coolant Temperature Sensor
3306B Industrial Engine Air Starting System
3406E Truck Engines Engine Support (Front)
3406C Engines for Caterpillar Built Machines Fuel Injection Lines
3406E On-Highway Engine Electric Starting Motor - Remove and Install
G3612 and G3616 Engines Pressure Relief Valve Setting
3406E Truck Engines Electric Starting Motor
3306B Industrial Engine Starting the Engine
C-10 and C-12 Industrial Engines Inlet Air Temperature Sensor
3306B Industrial Engine Refill Capacities
3406C (PEEC III) Truck Engine Engine Oil Filter Base
3406C (PEEC III) Truck Engine Engine Oil Pan