A Procedure to Remove the Fourth Accumulator and Expansion Tank on Certain 793F CMD Off-Highway Truck is Available {4331, 5057} Caterpillar


A Procedure to Remove the Fourth Accumulator and Expansion Tank on Certain 793F CMD Off-Highway Truck is Available {4331, 5057}

Usage:

793F CMD RBT
Off-Highway Truck/Tractor
793F (S/N: SSP1-1233; RBT1-235)

Reference: Special Instruction, M0100593, "Procedure to Remove the Fourth Accumulator And Expansion Tank on Certain 793F CMD Off-Highway Trucks"

Description Of Change: A procedure to remove the fourth accumulator and expansion tank is available for the machines listed above.

Removing the steering accumulator is not required, however new conversions no longer require installation of steering accumulator and steering expansion tank on top of the right hydraulic tank. Leaving out the operations related to the steering accumulator and expansion tank saves 36 man-hours in the build, reduces the potential for leaks, and simplifies filling the hydraulic oil level.

The software has been improved to reduce unnecessary steering movement, and hence reduce "Low Secondary Steering Pressure" warnings. Revert to the standard steering sight gauge locations so that the steering oil volumes will be correct when the technicians are checking for oil levels.

Adaptable To:

------ WARNING! ------

Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.




Illustration 1g06394452
Location of fourth accumulator group


Illustration 2g06394459
Location of expansion tank

Procedure to remove the fourth accumulator and expansion tank to is adaptable to the machines within the listed serial numbers, and is effective in production with all the machines after the listed serial numbers.

For the complete procedure, parts, and tools required to remove the fourth accumulator and expansion tank, refer to the most recent version of Special Instruction, M0100593, "Procedure to Remove the Fourth Accumulator And Expansion Tank on Certain 793F CMD Off-Highway Trucks".

The special instruction can be found on Caterpillar Service Information System (SIS) and through the normal literature system.

Caterpillar Information System:

D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Quick Disconnect Couplings Operation
Push-Button Switch Group in the Transmission Control Group May Fail on Certain Backhoe Loaders {3065, 3168} Push-Button Switch Group in the Transmission Control Group May Fail on Certain Backhoe Loaders {3065, 3168}
986K Large Wheel Loader Systems Service Brake Wear Indicator - Check
Ground Cable Assembly in the Cab Wiring Group May Cause Multiple Diagnostics Troubleshooting Codes on Certain Telehandlers {1408} Ground Cable Assembly in the Cab Wiring Group May Cause Multiple Diagnostics Troubleshooting Codes on Certain Telehandlers {1408}
A Machine Harness Rework Procedure Is Now Used on Certain 521B and 522B Track Feller Bunchers {1356, 1360} A Machine Harness Rework Procedure Is Now Used on Certain 521B and 522B Track Feller Bunchers {1356, 1360}
950M and 962M Wheel Loaders Braking System - Test
New Selective Catalytic Reduction (SCR) Mounting Bracket Assembly Is Now Used on Certain Compact Track Loaders, Multi Terrain Loader, and Skid Steer Loaders {7279} New Selective Catalytic Reduction (SCR) Mounting Bracket Assembly Is Now Used on Certain Compact Track Loaders, Multi Terrain Loader, and Skid Steer Loaders {7279}
797F Off-Highway Truck Field Assembly Assembly Procedure for the Off-Highway Truck - 797F
New Software Version is Now Available for Certain Cat® MineStar Fleet {7605} New Software Version is Now Available for Certain Cat® MineStar Fleet {7605}
New Cover Kit Is Now Used on Certain Compact Track Loaders, Multi Terrain Loaders and Skid Steer Loaders {7170} New Cover Kit Is Now Used on Certain Compact Track Loaders, Multi Terrain Loaders and Skid Steer Loaders {7170}
Threaded Insert Repair Kit for Oscillating Hitch Is Now Available on Certain CB66B Compactors {7113} Threaded Insert Repair Kit for Oscillating Hitch Is Now Available on Certain CB66B Compactors {7113}
New Machine Software Is Now Used on Certain CW16,CW34, and CW34 LRC Pneumatic Compactors {7610, 7620} New Machine Software Is Now Used on Certain CW16,CW34, and CW34 LRC Pneumatic Compactors {7610, 7620}
797 Off-Highway Truck Engine Coupling Oil Screen - Clean
Procedure to Rework Heater Hold Downs and Replace Heaters for Certain SE60 VT XW Screeds {1408} Procedure to Rework Heater Hold Downs and Replace Heaters for Certain SE60 VT XW Screeds {1408}
Fit and Form Changes on Inverter Used on F series Pavers {1404, 1408, 4459} Fit and Form Changes on Inverter Used on F series Pavers {1404, 1408, 4459}
New Track Roller Group Is Now Used on certain Excavators and Forest Machines {4180} New Track Roller Group Is Now Used on certain Excavators and Forest Machines {4180}
New Secondary Steering Relay Bracket Is Now Used on Certain 950L, 950M, 962L, and 962M Medium Wheel Loaders {1408, 4304, 4324, 4334} New Secondary Steering Relay Bracket Is Now Used on Certain 950L, 950M, 962L, and 962M Medium Wheel Loaders {1408, 4304, 4324, 4334}
2019 Updates for Certain M Series Medium Wheel Loaders {108U, 1374, 1920, 5084, 7000, 7312} 2019 Updates for Certain M Series Medium Wheel Loaders {108U, 1374, 1920, 5084, 7000, 7312}
730C and 730C EJECTOR Articulated Trucks Power Train Hitch Drive Shaft - Disassemble
730C and 730C EJECTOR Articulated Trucks Power Train Hitch Drive Shaft - Assemble
Improved Pitch Cylinders are Now Used on 415 F2 IL Backhoe Loaders {5106} Improved Pitch Cylinders are Now Used on 415 F2 IL Backhoe Loaders {5106}
AC Inverter Cabinet Maintenance and Cover Hardware Update for Certain Large AC Drive Off-Highway Trucks {1054, 4822} AC Inverter Cabinet Maintenance and Cover Hardware Update for Certain Large AC Drive Off-Highway Trucks {1054, 4822}
The Steering Lines Group is Improved on Certain 797F Off-Highway Trucks {4304} The Steering Lines Group is Improved on Certain 797F Off-Highway Trucks {4304}
Improved Grab Handles Are Now Used on Certain PL83 and PL87 Pipelayers {7254} Improved Grab Handles Are Now Used on Certain PL83 and PL87 Pipelayers {7254}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.