DSS Mining Test Button
Show/hide table
| |
| Illustration 1 | g06135242 |
|
Test button (optional) | |
Refer to the following procedure when the test button is not working:
- Check the test button cable for any signs of damage. If damage is present, replace the cable.
- Check the test button cable connections. Ensure that all connections are secured properly.
- Ensure that the test button is enabled by logging in to the IVS web interface and selecting "Configuration", "DSS", "Peripherals", and "Test Button".
- Ensure that the test button is connected to the correct ports. The test button should be connected to the GPIO port via the IVS web interface.
Show/hide table
Illustration 2 g06358486 - Check the DSS mining control GPIO port for the correct voltages. The voltage on pin 3 is 12V, pin 4 is 5V, and pin 5 is ground. Refer to Illustration 2.
Note: The test button LED will not illuminate of the test button has been utilized once.
Caterpillar Information System:
Driver Safety System DSS Mining Speaker
Driver Safety System DSS Mining Camera
Band Clamps for Water Lines Are Breaking on Certain C18 Engines {1380} Band Clamps for Water Lines Are Breaking on Certain C18 Engines {1380}
Driver Safety System DSS Mining IR Light
Driver Safety System DSS Mining GPS Module
Service Tools Are Now Available for Certain Utility Vehicles {0599} Service Tools Are Now Available for Certain Utility Vehicles {0599}
Transmission Forward and Reverse Lever Troubleshooting Problem May Occur On Certain Backhoe Loaders {1408, 3168} Transmission Forward and Reverse Lever Troubleshooting Problem May Occur On Certain Backhoe Loaders {1408, 3168}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Solenoid Valve
797B Off-Highway Truck Declaration of Conformity
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Moldboard
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Hydraulic Cylinder
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Hydraulic Cylinder
Improved Front Suspension Cylinder Bellows and Retention Clamps for 794 AC Off-Highway Trucks are Available {7201} Improved Front Suspension Cylinder Bellows and Retention Clamps for 794 AC Off-Highway Trucks are Available {7201}
Procedure to Improve Transmission Filter Serviceability on Certain 793D Off-Highway Trucks {1374, 1380, 5057} Procedure to Improve Transmission Filter Serviceability on Certain 793D Off-Highway Trucks {1374, 1380, 5057}
Transmission Filter Serviceability is Improved on Certain 793D Off-Highway Trucks {1374, 1380, 5057} Transmission Filter Serviceability is Improved on Certain 793D Off-Highway Trucks {1374, 1380, 5057}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Idlers (Track)
High Voltage Cable Assembly Routing is Now Improved on Certain 794 AC Off-Highway Trucks {1408} High Voltage Cable Assembly Routing is Now Improved on Certain 794 AC Off-Highway Trucks {1408}
An Improved Harness Assembly is Now Used in the Transmission Wiring Group on Certain 777E, 777F, and 777G Off-Highway Trucks {1408, 3030} An Improved Harness Assembly is Now Used in the Transmission Wiring Group on Certain 777E, 777F, and 777G Off-Highway Trucks {1408, 3030}
Rework Procedure for the Fuel Filter Housing on Certain Machine Engines {1261} Rework Procedure for the Fuel Filter Housing on Certain Machine Engines {1261}
Procedure to Modify the Oil Pan for Additional Oil Sensor Ports on Certain 793F, 794AC, and 795F AC Off-Highway Truck Engines {1302, 1408, 1439, 7422} Procedure to Modify the Oil Pan for Additional Oil Sensor Ports on Certain 793F, 794AC, and 795F AC Off-Highway Truck Engines {1302, 1408, 1439, 7422}
14M Series 3 Motor Grader Circle Drive Pinion Teeth - Lubricate
The Implement Valve Tilt or Lift Section Centering Spring May Break on Certain Compact Track Loaders, Multi Terrain Loaders, and Skid Steer Loaders {5051} The Implement Valve Tilt or Lift Section Centering Spring May Break on Certain Compact Track Loaders, Multi Terrain Loaders, and Skid Steer Loaders {5051}
Manufacturing Process for the Standard Shift Transmission Synchronizer Sleeve Has Been Improved on Certain Backhoe Loaders {3030, 3053, 3063} Manufacturing Process for the Standard Shift Transmission Synchronizer Sleeve Has Been Improved on Certain Backhoe Loaders {3030, 3053, 3063}
The Final Drive Group has been Improved on Certain 777F and 777G Off-Highway Trucks {4050} The Final Drive Group has been Improved on Certain 777F and 777G Off-Highway Trucks {4050}