New Routing Of The Cable Wiring Group Is Now Used On Certain Track Feller Bunchers {1408}
- Track Feller Buncher
- 521B (S/N: F7B301-432)
- 522B (S/N: F7C274-383)
- 541 Series 2 (S/N: F7D241-258)
- 552 Series 2 (S/N: F7G196-258)
- 522B (S/N: F7C274-383)
Description Of Change: The wiring of the cable group is now routed differently to prevent shorts and broken wires.
Adaptable To: The following changes are adaptable to the machines within the listed serial numbers, and are effective with all machines after the listed serial numbers.
Show/hide table
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility. |
Show/hide table
Required Parts | ||
---|---|---|
Qty | Part Number | Part Name |
1 | Console Harness As | |
1 | Clip | |
3 | Conduit | |
2 | Cable Strap | |
2 | Clip | |
3 | Clip | |
3 | Clip | |
3 | Hard Washer | |
3 | Nut | |
3 | Bolt |
Routing Procedure
- Remove 259-7346 Armrest (B) and 185-8284 Cover (C) as shown in Illustration 3.
Show/hide table
Illustration 4 g06364967 (D) Start Switch
(E) Potentiometer Assembly - Remove plate from inside console and disconnect start switch (D) and potentiometer assembly (E) from the bottom of the console as shown in Illustration 4.
Show/hide table
Illustration 5 g06364978 (A) 374-4371 Console Harness As
(F)374-4362 Console Wiring GpShow/hide tableIllustration 6 g06364082 Rear view of 498-5443 Suspension Seat Gp - Fasten the 374-4362 Console Wiring Gp to the rear of the 498-5443 Suspension Seat Gp as shown in Illustration 6.
Show/hide table
Illustration 1 | g06364933 |
(A) |
Show/hide table
Illustration 2 | g06364929 |
(B) (C) |
Show/hide table
Illustration 3 | g06364938 |
View with |
Caterpillar Information System:
New Features of Advanced Display are Now Used on Certain Compact Track Loaders, Multi Terrain Loaders, and Skid Steer Loaders {7610, 7620} New Features of Advanced Display are Now Used on Certain Compact Track Loaders, Multi Terrain Loaders, and Skid Steer Loaders {7610, 7620}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Fan Drive Motor
An Improved Suspension Link Bearing is Now Used on Certain Off-Highway Trucks {7051, 7230} An Improved Suspension Link Bearing is Now Used on Certain Off-Highway Trucks {7051, 7230}
Hydraulic Cabinet Gauges May Leak on Certain 794 AC Off-Highway Trucks {7450, 7554} Hydraulic Cabinet Gauges May Leak on Certain 794 AC Off-Highway Trucks {7450, 7554}
Enclosure Group Gauges are Now Improved on Certain Off-Highway Trucks {7450, 7513, 7554} Enclosure Group Gauges are Now Improved on Certain Off-Highway Trucks {7450, 7513, 7554}
The Enclosure Group is Now Improved on Certain 794 AC Off-Highway Trucks {7513, 7554} The Enclosure Group is Now Improved on Certain 794 AC Off-Highway Trucks {7513, 7554}
Improved Rocker Arm Assembly is Now Used on Certain C9.3 Machine Engines {1123} Improved Rocker Arm Assembly is Now Used on Certain C9.3 Machine Engines {1123}
Long Wait Times for Transmission Parts Ordering for Articulated Trucks {3030, 7567} Long Wait Times for Transmission Parts Ordering for Articulated Trucks {3030, 7567}
The Front Suspension Mounting Group is Improved on Certain 793F Off-Highway Trucks {7200} The Front Suspension Mounting Group is Improved on Certain 793F Off-Highway Trucks {7200}
789D CMD Off-Highway Trucks (Command for Hauling) Power Train Electronic Control System Switches
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Operator Controls
797 Off-Highway Truck Engine Supplement Piston Motor (Fan Drive) - Remove and Install
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Hydraulic Cylinder
An Improved Winch Group is Now Used on Certain PL72 Pipelayers {5401} An Improved Winch Group is Now Used on Certain PL72 Pipelayers {5401}
Rework Procedure for Fender Covers and Mud Flaps on Certain 700 C-Series Articulated Trucks {4220, 7150, 7252} Rework Procedure for Fender Covers and Mud Flaps on Certain 700 C-Series Articulated Trucks {4220, 7150, 7252}
Cat® Compaction Control Setup and Configuration Procedure for Certain Asphalt and Soil Compactors {1408, 7490, 7494, 7610} Cat® Compaction Control Setup and Configuration Procedure for Certain Asphalt and Soil Compactors {1408, 7490, 7494, 7610}
Rework Procedure for Fender Covers and Mud Flaps Is Now Available on Certain 700 C-Series Articulated Trucks {7150, 7220, 7252} Rework Procedure for Fender Covers and Mud Flaps Is Now Available on Certain 700 C-Series Articulated Trucks {7150, 7220, 7252}
The Routing of the Harness Assembly in the Seat Belt Group has been Improved on Certain 773E and 777E Off-Highway Trucks {1408, 7312, 7327} The Routing of the Harness Assembly in the Seat Belt Group has been Improved on Certain 773E and 777E Off-Highway Trucks {1408, 7312, 7327}
Hydraulic Hose Assembly May Leak on Certain 424B, 424B HD, 424B2, and 426 F2 Backhoe Loaders {5057} Hydraulic Hose Assembly May Leak on Certain 424B, 424B HD, 424B2, and 426 F2 Backhoe Loaders {5057}
A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Machine Engines {1202} A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Machine Engines {1202}
A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Engines {1202} A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Engines {1202}
789D CMD Off-Highway Trucks (Command for Hauling) Power Train Electronic Control System Engine Overspeed Function
789D CMD Off-Highway Trucks (Command for Hauling) Power Train Electronic Control System Sensors
C3.3B and C3.8 Engines for Caterpillar Built Machines Engine Injector Trim File - Install