Type 1
Illustration 1 | g00361392 |
Note: Refer to the Systems Operation/Testing and Adjusting for the correct method for flywheel runout and flywheel inspection.
(1) Put 4C-5593 Anti-Seize Compound on the 12 Point Head bolt threads before assembly. Tighten the bolts to the following torque. ... 360 ± 25 N·m (265 ± 18 lb ft)
Note: Do not use a torch to install the gear onto the flywheel.
(2) The maximum permissible temperature of the gear for installation on the flywheel is the following value. ... 320°C (610°F)
Type 2
Illustration 2 | g00361392 |
Note: Refer to the Systems Operation/Testing and Adjusting for the correct method for flywheel runout and flywheel inspection.
(1) Put 4C-5593 Anti-Seize Compound on the Hex Head bolt threads before assembly. Tighten the bolts to the following torque. ... 270 ± 40 N·m (199 ± 30 lb ft)
Note: Do not use a torch to install the gear onto the flywheel.
(2) The maximum permissible temperature of the gear for installation on the flywheel is the following value. ... 320°C (610°F)