239D and 249D Compact Track Loaders and 232D Skid Steer Loader Engine Supplement Caterpillar


Engine Enclosure - Remove and Install

Usage:

249D AH9

拆卸步骤

------ WARNING! ------

在工作温度下,发动机冷却液是热的,并且带有压力。

蒸汽还会引起人身伤害。

只有在发动机已关闭且加注口盖冷却到可徒手触摸后,才能检查冷却液液位。

缓慢卸下加注口盖,释放其中压力。

冷却系统添加剂含碱。 应避免皮肤和眼睛与其接触,以防造成人身伤害。


------ WARNING! ------

接触制冷剂会使人受伤。

接触制冷剂会造成冻伤。 让手、脸避开,有助于防止受伤。

制冷管路被打开时,即使压力计显示系统中已经没有制冷剂,也要始终戴着护目镜。

拆卸管件时,务必小心谨慎。 慢慢地拧松接头。 如果系统内仍有压力,就要把它缓慢地释放到一个通风良好的地方去。

通过燃着的香烟吸入制冷剂会使人受伤或死亡。

通过燃着的香烟或其他抽烟方法吸入空调制冷气体,或者,吸入空调制冷气体接触明火而形成的烟雾,都会造成对人体的伤害 或死亡。

维修空调时,或者,在任何可能存在制冷气体的地方都不要抽烟。

采用经过认可的回收和循环利用车妥善地从空调器中取出制冷剂。


  1. 回收制冷剂。 有关步骤请参阅维修手册, SENR5664, "使用 R-134a 制冷剂的空调和暖风系统"。 请参考代理商维修工具目录, NENG2500, "空调工具"以了解正确的工具。


    图 1g03785891

  2. 断开线束组件 (1)。 拆下软管组件 (2)。 拆下 P 形夹子 (3)。

  3. 断开线束组件 (4)。 断开软管组件 (6)。 断开线束组件 (7)。

  4. 由两个人拆下销 (5),然后拆下发动机外罩 (8)。 发动机外罩 (8) 的重量约为 34 kg (75 lb)

安装步骤

  1. 按与拆卸相反的顺序安装发动机外罩 (8)。

Caterpillar Information System:

Procedure to Install an Aftermarket Grade Control System on Certain Series F Pavers and Series SE Screeds {1408, 6640, 7000, 7220} Procedure to Install an Aftermarket Grade Control System on Certain Series F Pavers and Series SE Screeds {1408, 6640, 7000, 7220}
239D and 249D Compact Track Loaders and 232D Skid Steer Loader Engine Supplement Electronic Control Module (ECM) - Remove and Install
C2.2 Engines for Caterpillar Built Machines Temperature Sensor (Exhaust)
C7.1 Engines DEF Line Heater - Test
SE50 V and SE50VT Asphalt Screeds Tamper Blade - Check
C2.2 Engines for Caterpillar Built Machines Temperature Sensor (DOC Inlet)
C2.2 Engines for Caterpillar Built Machines Belt Tension Chart
SE50 V and SE50VT Asphalt Screeds Screed - Lubricate
816K Landfill Compactor Battery Disconnect Switch
SE50 V and SE50VT Asphalt Screeds Fuses - Replace
794 AC Off-Highway Truck Engine Supplement Hood - Remove and Install
2015/01/19 A Procedure To Replace the Adapter Group on Certain 795F AC and 795F AC XQ Off-Highway Trucks is Available {4456}
239D and 249D Compact Track Loaders and 232D Skid Steer Loader Engine Supplement Refrigerant Compressor - Remove and Install
816K Landfill Compactor Diesel Exhaust Fluid - Fill - Emission Related Component
AP600F Asphalt Paver Maintenance Interval Schedule
Procedure to Ultrasonic Test (UT) the Rear Axle Housing of the 795F AC Off-Highway Truck{0599, 0700, 0722, 3260, 3260, 3260} Procedure to Ultrasonic Test (UT) the Rear Axle Housing of the 795F AC Off-Highway Truck{0599, 0700, 0722, 3260, 3260, 3260}
AP655F and AP655F L Asphalt Paver Maintenance Interval Schedule
AP655F Asphalt Paver Maintenance Interval Schedule
735C, 740C EJECTOR and 745C Articulated Trucks Indication Display/CMPD Monitoring Determining Diagnostic Trouble Codes
440, 450 Backhoe Loader Steering System
Field Procedure to Adjust the Steering Shaft on Certain Off-Highway Trucks{4310, 4343} Field Procedure to Adjust the Steering Shaft on Certain Off-Highway Trucks{4310, 4343}
2015/02/06 A New Special Instruction is Available to Adjust the Steering Shaft on Certain Off-Highway Trucks {4310}
2015/01/16 The Transmission Lubrication System is Now Updated on 797 and 797B Off-Highway Trucks {3030, 3064, 3160, 3182}
239D and 249D Compact Track Loaders and 232D Skid Steer Loader Engine Supplement Radiator Guard - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.