Instructions to Disable Compatibility Mode For CAESoffice Executable On Windows 7 Operating Systems {7490, 7600, 7605}
- Machine Control and Guidance Products:
- CAES ULTRA (S/N: 2TZ1-UP)
The CAESoffice program executable on Windows 7 operating systems replaces the existing software registration key with a new unusable number upon opening the CAESoffice application when the program executable is set to run in Windows XP (Service Pack 3) compatibility mode.
Perform the following instruction steps to disable compatibility mode for CAESoffice Executable on Windows 7 Operating Systems.
- Browse to the following location "C:\Program Files\Caterpillar\CAESofficeExe" or "C:\Caterpillar\CAESofficeExe". Right click on "CAESoffice.exe" and Select "Properties".
Show/hide table
 | |
| Illustration 1 | g03778682 |
- Select the "Compatibility" tab and ensure that the following selections are unchecked. Uncheck "Run this program in compatibility mode for: Windows XP (Service Pack 3)" in the Compatibility mode section. Uncheck "Run this program as an administrator" in the "Privilege level" section.
Show/hide table
 | |
| Illustration 2 | g03778687 |
- Click "OK" to save changes.
Show/hide table
 | |
| Illustration 3 | g03778688 |
Caterpillar Information System:
299D2 and 299D2 XHP Compact Track Loaders, 297D2 and 297D2 XHP Multi Terrain Loaders and 272D2 and 272D2 XHP Skid Steer Loaders Machine Systems Control Valve (Work Tool) - Remove and Install - Standard Flow
735C and 745C Articulated Trucks Machine Systems Machine Preparation for Testing and Adjusting
CP34 and CS34 Vibratory Soil Compactors Engine Oil and Filter - Change
CP34 and CS34 Vibratory Soil Compactors Engine Oil Sample - Obtain
735C and 745C Articulated Trucks Belt - Inspect/Replace
Incorrect Torque Specifications in the Operation and Maintenance Manual, "Wheel Nut Torque - Check" for F-Series Backhoe Loaders{4057, 4201, 4202, 4208, 4209} Incorrect Torque Specifications in the Operation and Maintenance Manual, "Wheel Nut Torque - Check" for F-Series Backhoe Loaders{4057, 4201, 4202, 4208, 4209}
PL72 Pipelayer Winch Oil Level - Check
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Power Train NoSPIN Differential - Test - Before Installation
PL72 Pipelayer Winch Oil - Change
F2 Series Backhoe Loaders Monitoring System Service Menu
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train Transmission (Power Shift) - Install
PL72 Pipelayer Winch Frame Mounting - Inspect
735C and 745C Articulated Trucks Machine Systems System Pressure - Release
2015/01/27 Uninstalling Updates and Disabling Automatic Windows Updates Enables "B" Snippets Within METSmanager {7604}
735C and 745C Articulated Trucks Machine Systems Hydraulic Oil Contamination - Test
745 Articulated Truck Fuel System - Prime
2014/12/17 Improved LARN Antenna Now Used on CAT ® Command for Underground Equipped Machines {7338, 733T}
745 Articulated Truck Brake Tank Strainer - Clean/Inspect/Replace
415F2, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Hydraulic and Steering System Steering Control
415F2, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Hydraulic and Steering System Bucket Cylinder (Backhoe)
Visual Routing Guide for Battery Cable and Fuel Lines for Certain 24M Motor Graders{1408} Visual Routing Guide for Battery Cable and Fuel Lines for Certain 24M Motor Graders{1408}
415F2, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Axles, Differential and Brakes Service Brake Control
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Hydraulic and Steering System Hydraulic Hand Control
422F2, 426F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Axles, Differential and Brakes Service Brake Control