NoSPIN Differential - Test - Before Installation
After the NoSPIN differential has been assembled, test the operation of the differential. Perform this test before the differential is installed on the machine.
- Install the NoSPIN differential in the case.
- Install the case in a stand or in a vise in order to keep the case from rotating.
- Install both axles in the case.
- Apply a force in a clockwise direction on both axles.
Show/hide table
 | |
| Illustration 1 | g00283752 |
NoSPIN Differential (1) Case. (A) Axle. (B) Axle. | |
- Keep the force on axle (A) and turn axle (B) in a counterclockwise direction. The NoSPIN differential will make a small noise and axle (B) will turn freely.
- Keep the force on axle (A) and turn axle (B) in a clockwise direction. The NoSPIN differential will make a small noise and axle (B) will not turn farther.
Note: Make sure that the force is kept on axle (A) .
- Apply a force in a counterclockwise direction on both axles.
Show/hide table
 | |
| Illustration 2 | g00283753 |
Test of the NoSPIN Differential | |
- Keep the force on axle (A) and turn axle (B) in a clockwise direction. The NoSPIN differential will make a small noise and axle (B) will turn freely.
- Keep the force on axle (A) and turn axle (B) in a counterclockwise direction. The NoSPIN differential will make a small noise and axle (B) will not turn farther.
Note: Make sure that the force is kept on axle (A) .
- Perform Steps 4 through 9 again, but hold axle (B) while you turn axle (A) .
If the NoSPIN differential does not act correctly, inspect the components and check the assembly procedure.
Caterpillar Information System:
PL72 Pipelayer Winch Oil - Change
F2 Series Backhoe Loaders Monitoring System Service Menu
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train Transmission (Power Shift) - Install
PL72 Pipelayer Winch Frame Mounting - Inspect
C7.1 Engines NRS Mass Flow Rate Problem
F2 Series Backhoe Loaders Monitoring System Settings Menu
C7.1 Engines NRS Exhaust Gas Temperature Is High
CP34 and CS34 Vibratory Soil Compactors Engine Oil Level - Check
422F2, 427F2, 428F2, 432F2 and 434F2 Backhoe Loaders Transmission (Standard Shift) Transmission (Standard Shift)
CP34 and CS34 Vibratory Soil Compactors Eccentric Weight Housing Oil - Change
415F2, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Hydraulic and Steering System Hydraulic Hand Control (Loader) (Mechanically Operated)
New Water Tanks Are Now Available for Certain CB54B Vibratory Asphalt Compactors {5613} New Water Tanks Are Now Available for Certain CB54B Vibratory Asphalt Compactors {5613}
PL72 Pipelayer Winch Oil Level - Check
Incorrect Torque Specifications in the Operation and Maintenance Manual, "Wheel Nut Torque - Check" for F-Series Backhoe Loaders{4057, 4201, 4202, 4208, 4209} Incorrect Torque Specifications in the Operation and Maintenance Manual, "Wheel Nut Torque - Check" for F-Series Backhoe Loaders{4057, 4201, 4202, 4208, 4209}
735C and 745C Articulated Trucks Belt - Inspect/Replace
CP34 and CS34 Vibratory Soil Compactors Engine Oil Sample - Obtain
CP34 and CS34 Vibratory Soil Compactors Engine Oil and Filter - Change
735C and 745C Articulated Trucks Machine Systems Machine Preparation for Testing and Adjusting
299D2 and 299D2 XHP Compact Track Loaders, 297D2 and 297D2 XHP Multi Terrain Loaders and 272D2 and 272D2 XHP Skid Steer Loaders Machine Systems Control Valve (Work Tool) - Remove and Install - Standard Flow
2015/01/23 Instructions to Disable Compatibility Mode For CAESoffice Executable On Windows 7 Operating Systems {7490, 7600, 7605}
735C and 745C Articulated Trucks Machine Systems System Pressure - Release
2015/01/27 Uninstalling Updates and Disabling Automatic Windows Updates Enables "B" Snippets Within METSmanager {7604}
735C and 745C Articulated Trucks Machine Systems Hydraulic Oil Contamination - Test
745 Articulated Truck Fuel System - Prime