Bulldozer Stabilizer - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 8B-7559 | Adapter | 2 |
8B-7554 | Bearing Cup Puller Gp | 1 | |
8B-7548 | Push-Puller Tool Gp | 1 | |
8H-0684 | Ratchet Wrench | 1 | |
B | 5P-3100 | Hand Pump Gp | 1 |
5P-2998 | Hydraulic Puller As | 1 | |
9S-5558 | Pin Puller Stud | 1 | |
1P-1839 | Bearing Puller Adapter | 1 | |
1P-0544 | Fast Runner Nut Assembly | 1 | |
FT1395 | Adapter Plate | 1 |
Start By:
- Remove the push arms and the blade.
- Position a suitable power truck under bulldozer stabilizer (1). Secure bulldozer stabilizer (1) to the power truck.
Show/hide table
Illustration 2 g03730849 - Disconnect grease hose assembly (2).
- Remove pin assembly (3) and the shims.
- Repeat Steps 2 and 3 for the opposite side.
Show/hide table
Illustration 3 g00883163 - Use the suitable power truck in order to remove bulldozer stabilizer (1). The weight of bulldozer stabilizer is approximately
264 kg (582 lb) .Show/hide tableIllustration 4 g03730870 - Remove nut (6) and the bolt. Remove pin (5) and connector (4).
- Remove bolts (7) and the washers from plate (8).
Show/hide table
Illustration 5 g03730904 - Attach a suitable lifting device to slider (9). The weight of slider (9) is approximately
50 kg (110 lb) . Use the suitable lifting device in order to remove slider (9).Show/hide tableIllustration 6 g03730910 - Remove bolts (10) and the washers. Remove cover assembly (11).
Show/hide table
Illustration 7 g03730912 - Use Tooling (A) in order to remove bearings (12).
Show/hide table
Illustration 1 | g00883163 |
- Install bulldozer stabilizer (1) in the reverse order of removal.
- Use Tooling (B) in order to install bearings (12).
Caterpillar Information System:
785G Off-Highway Truck Systems Brake Valve (Front Service Brake)
PL83 and PL87 Pipelayers Air Conditioner Condenser - Clean - If Equipped
785G Off-Highway Truck Systems Final Drive, Brake, and Wheel
AP655F and AP655F L Asphalt Paver Machine Systems Screed Frame
785G Off-Highway Truck Systems Brake Valve (Front Service Brake)
725C2 and 730C2 Articulated Truck Machine System Front Frame and Rear Frame - Separate
428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Specifications
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Brake Control Valve (Parking) - Remove and Install
C3.4B Engines Relay - Test - Start Relay
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Ride Control Accumulator - Test and Charge
Installation of the 466-1959 Kit for Closed Crankcase Breather (CCB) On Certain Machines Equipped with C3.3B Tier 4 Final Engines {1317} Installation of the 466-1959 Kit for Closed Crankcase Breather (CCB) On Certain Machines Equipped with C3.3B Tier 4 Final Engines {1317}
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Brake Control Valve (Parking) - Remove and Install
785G Off-Highway Truck Systems Brake Valve (Rear Service Brake)
Instructions for Installing Cab Storage Compartments on Certain M, M Series 2 and M Series 3 Motor Graders{7266, 7301, 7329} Instructions for Installing Cab Storage Compartments on Certain M, M Series 2 and M Series 3 Motor Graders{7266, 7301, 7329}
2014/09/29 The Multipurpose Bucket Cylinder Has Been Improved for Certain F Series Backhoe Loaders {5457, 6104}
PL83 and PL87 Pipelayers Engine Oil Level - Check
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Piston Pump (Implement) - Test and Adjust
2014/12/09 Maintenance Parts for the Automatic Lubrication Group are Now Available for Certain Off-Highway Trucks {7516, 7540}
558 Forest Machine Maintenance Interval Schedule
785G Off-Highway Truck Systems Slack Adjuster (Front Brakes)
2014/09/30 New Transmission Software is Now Used on Certain 793F and 797F Off-Highway Trucks {3175, 7620}
725C2 and 730C2 Articulated Truck Machine System Front Frame and Rear Frame - Connect
2015/01/06 An Improved Radiator Tube Assembly is Now Available for Certain 789D Off-Highway Trucks {1353}
785G Off-Highway Truck Systems Slack Adjuster (Rear Brakes)